Briclyaz

NLSound v4.2 BETA [QCom Devices] Changelog

2025-02-09T19:13:37.912Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Numerous fixes to bit rate and sample rate fixes where possible;

[!] - Numerous fixes to the operability of tinymix parameters for your devices;

[!] - Fixed patching of resourcemanager files;

[!] - Fixed disabling built-in audio equalization applications like AudioFX / MusicFX;

[!] - Fixed possible microphone issues when installing the 8 item on different devices;

[!] - Fixed Samsung A71 device detection;

[!] - Fixed problem with module not mounting /odm, /product, /my_product, /mi_ext partitions: now the module works correctly with these partitions and changes necessary parameters in them without the need to put the system into R/W mode by different methods;

[!] - Fixed an issue with the speaker not working on the Redmi Note 9 Pro device;

[!] - Numerous fixes to prop parameters;

[!] - Fixed issue with non-functioning microphone on Redmi Note 9 Pro device if consent was given to install 14 item in module;

[!] - Fixed an issue with infinite loading on Mi 11 Ultra device;

[!] - Fixed issue with microphone not working on Mi 11 Ultra device;

[!] - The module has now learned to distinguish between devices when the device codename is the same: this will fix some possible parameter incompatibility issues between devices;

[!] - Fixed Dolby issues on many devices when agreeing to install item 15;

[!] - Other changes we may have forgotten about.

[*] - Changed logic of device support detection: now it is faster and more correct;

[*] - Updated tinymix parameters for Redmi Note 9 Pro;

[*] - Updated tinymix parameters for Mi 14 Ultra;

[*] - Updated tinymix parameters for Realme 12 Pro+;

[*] - Updated tinymix parameters for Poco F3;

[*] - Numerous visual updates in the module installer;

[*] - Qualitative refactoring of the 6th item of the installer: now the code executes more correctly and faster;

[*] - Significantly reduced module weight by removing addons included in the standard MMT-EX package from zackptg5;

[*] - Numerous quality refactoring of the module installer code, which should affect the speed of installation and correct operation of the module on various devices;

[*] - Tinymix parameters are now supported for previously unsupported devices;

[*] - The logic of buttons operation has been changed: take this into account when installing the module;

[*] - Other changes we may have forgotten about.

[-] - Removed numerous problematic parameters from the 14 point installer;

[-] - Removed xmlstarlet from the module due to its lack of necessity;

[-] - Other changes we may have forgotten about.

[+] - Added the tinymix library, built on the latest source code from the developers' GitHub;

[+] - Added patching of audio effects if you agreed to install the 13th installer item;

[+] - Added tinymix parameters for 1+12;

[+] - Added automatic restart of the audio server to the 14 installer item;

[+] - Added a feature that allows you to duplicate your tinymix settings in the mixer_paths file: this should greatly affect the audio quality of your device;

[+] - Added option to remove audio libraries when agreeing to install 13 of the installer: however, this may cause serious problems. Be sure to tell us about your experience with this installer item to further develop this concept in our support chat;

[+] - Added a new installer item: the module now knows how to work with your acdb files and supports partial modification of them on devices based on processors 2023 and newer. For other devices, file deletion with different degrees is available: from partial deletion to maximum deletion. Detailed description can be found in the module installer;

[+] - Other changes we may have forgotten about.

CREDITS

• Scene and the lead developer- or a great implementation of the file mount script, we just integrated and adapted their solution for our module;

Support group: *CLICK*

Sources: GitHub

NLSound v4.1 BETA [QCom Devices] Changelog

2024-10-13T13:49:56.356Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed an issue that caused the XIAOMI 14 ULTRA device to infinitely start up after installing the module;

[!] - Fixed the logistics of the installer 4 and 5 items working, which caused some settings to not install properly due to incorrect validation condition;

[!] - Fixed an issue that caused the top speaker to not work when agreeing to install 4 and 5 installer items on XIAOMI 11 ULTRA device;

[!] - Fixed a bug in the 4th item of the installer that could cause unexpected problems if you use float;

[!] - Fixed personalized settings for POCO M3 and REDMI 9T in the 15th item of the installer;

[!] - Fixed an issue that was causing the top speaker to overload and breaking the volume control during audio calls on XIAOMI 12X device;

[!] - Fixed some issues that caused POCO X3 NFC device to not have volume control of system notification sounds and audio call volume control not working properly;

[!] - Fixed an issue that caused patching of resourcemanager.xml files to not work;

[!] - Fixed an issue that caused the MI 9T device to have problems playing music in Bluetooth music listening mode;

[!] - Fixed an issue in installer item 11 that caused patching audio_io_policy audio_output_policy files to not work properly on some devices;

[!] - Fixed an issue in installer item 13 that caused audio to be lost on some devices in case of installation agreement;

[!] - Fixed a logistic bug in 1 installer item;

[!] - Fixed an issue that caused the module to not find the microphone_characteristics.xml file on your system;

[!] - Other changes we may have forgotten about.

[*] - Updated the function code to restore the previous installation settings of the module;

[*] - Updated localization of the module to Russian;

[*] - Other changes we may have forgotten about.

[-] - Removed ro.vendor.audio.surround.support parameter from prop installer item due to its inappropriate use in audio quality improvement issue;

[-] - Disabled system API checking due to API Level 35 (Android 15) release;

[-] - Other changes we may have forgotten about.

[+] - Added new functionality: the module will now create a copy of settings.nls file in your device's internal memory in the NLSound folder;

[+] - Added new functionality: now our implementation of device bootloop protection is sewn into the module. It works quite simply: when restarting the device, the module automatically checks if the device has been initialized, if there is no initialization - the module is automatically removed and the device will automatically restart. After startup you will receive a notification that the module was removed due to bootloop;

[+] - Added new functionality: now the module automatically checks files in its folder for integrity. This is done so that in case of conflicts with other audio modules, the module can notify you that it is not working properly and needs to be installed. You will receive a corresponding notification when you start the device;

[+] - Added new parameters to the 7th item of the installer;

[+] - Added new parameters to ignore audio effects at system level for 13 installer item;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v4.0 STABLE [QCom Devices] Changelog

2024-07-29T09:41:13.714Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

* the furry is owned by 焕晨HChen and cannot be used without permission.

[!] - Fixed a bootloop you could get on your Xiaomi 13 Lite device when agreeing to install props;

[!] - Fixed an issue related to postponement of overload accumulation in notification sounds for Poco X3 NFC;

[!] - Fixed an issue related to bootloop on the Realme GT Neo 3T device;

[!] - Fixed an issue with the talk speaker volume control not working on the Mi 11 Ultra: in other words, your speaker always worked at maximum;

[!] - Fixed English translation: thanks to FaridZelli (you can find links to his resources in Credits);

[!] - Other changes we may have forgotten about.

[*] - Former 6 and 7 items are merged into one due to similarity of functionality in order to reduce the installation time of the module: PLEASE NOTE, because of this change your previous settings may not work correctly, as all items after 7 are numbered 1 less. Please use manual installation to update the configuration file;

[*] - Due to the addition of Chinese to the module, the visual component of the installer items has been changed: this is a deliberate step due to the fact that the Chinese alphabet has a different character width compared to the Latin/Cyrilic alphabet, which confounded the ability to align text within the installer item boundaries;

[*] - English translation changed: now it is correct in terms of your language and should not be questioned. Thanks to user FaridZelli for his help and assistance (all links to his resources can be found in Credits);

[*] - Other changes we may have forgotten about.

[-] - Removed settings that force your audio system to run in mono mode in some cases;

[-] - Other changes we may have forgotten about.

[+] - Added correct translation of module installer items into Chinese (thanks to 焕晨HChen for the translation, you can find links to his resources below in "Credits");

[+] - Added functionality for patching dolby_media_codecs, if your system has one: now your Dolby (if it is available in hardware, not to be confused with module-ports) will sound much better;

[+] - Other changes we may have forgotten about.

CREDITS

焕晨HChen - full translation of the module into Chinese, as well as for friendliness and openness:

GitHub: https://github.com/HChenX
CoolApk: http://www.coolapk.com/u/25022094

* the furry is owned by 焕晨HChen and cannot be used without permission.

Farid Zellipour - numerous corrections to the English translation of the module, as well as friendliness and mutual respect:

GitHub: https://github.com/FaridZelli
Telegram: https://t.me/FaridZelli
Linkedln: https://www.linkedin.com/in/faridzellipour

Majestic - For the many help, suggestions and comments:

Telegram: https://t.me/majestics_translation

Support group: *CLICK*

Sources: GitHub

NLSound v3.9 STABLE [QCom Devices] Changelog

2024-06-22T20:45:46.348Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed patching of mixer_paths files: now it is more correct and faster;

[!] - Other changes we may have forgotten about.

[*] - All parameters of build.prop file have been updated;

[*] - Changed parameters for items 1, 2, 3: now they are more flexible and there are fewer of them, you won't have to click a lot of buttons;

[*] - Other changes we may have forgotten about.

[-] - Delete aml.sh file;

[-] - Device codenames have been cleared;

[-] - Other changes we may have forgotten about.

[+] - Add support Tensor G3;

[+] - Add support Pixel 8;

[+] - Add support Pixel 8 Pro;

[+] - Add support Mi 14 Ultra;

[+] - Added the ability to install a module with previous parameters saved;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v3.9 BETA [QCom Devices] Changelog

2024-05-26T13:18:53.608Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed resetprop in item 15 of the installer: previously they never triggered because they were located after an infinite loop with no exit. In other words, they could only be executed after a loop that cannot end;

[!] - Other changes we may have forgotten about.

[*] - By patching only the necessary mixer_paths file, the module is much faster to install on many devices: you can see it for yourself by watching videos comparing the speed of module installation on two different devices at the link -> CLICK [Telegram];

[*] - Changed logic of auto-translator of module installation menu and notification: now it will take into account cases of interface language change without ROOT (e.g. via SetEdit) and show you the correct language;

[*] - Improved visual display of module installation progress: now you shouldn't have any complaints about installation progress stopping at 60% :)

[*] - Other changes we may have forgotten about.

[-] - Removed a problematic parameter from installer item 10, leading to bootlooping of various devices;

[-] - Other changes we may have forgotten about.

[+] - The module has learned to detect the audio card of your device: this is necessary for further changes, read the full list of changes;

[+] - Now the module can patch only the main mixer_paths file: relevant for modern devices, where audio files are duplicated in the path /vendor/etc/audio/ and in subfolders along this path;

[+] - Added patching of resoucemanager files: these files are currently present on a small number of devices, but nevertheless play an important role in sound customization;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v3.8 STABLE [QCom Devices] Changelog

2024-03-19T17:54:39.057Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed sound in audio calls using Telegram for Poco X3 NFC device;

[!] - Fix incrorrect condition skip -> Skip at one of the installer points;

[!] - Fixed Hi-Res output operation for some devices, including Poco X3 NFC;

[!] - Fixed a dumb syntax errors in the audio_codec patching function;

[!] - Fixed a dumb syntax issue with audio_platform_files patching that caused patching to not work correctly and cause bootloop or various issues on different devices;

[!] - Other changes we may have forgotten about.

[*] - Audio_policy patching logic has been slightly simplified: the module got rid of unnecessary useless checks of various conditions before making any changes to the file;

[*] - Changed some build.prop parameters for test compatibility with Android 14;

[*] - Other changes we may have forgotten about.

[-] - For Poco M3 and Redmi 9T removed some personal settings from the last item in the installer;

[-] - Removed unnecessary bindings to bit rate and audio sampling, as they were not working correctly and caused audio stuttering;

[-] - Removed some test settings that were supposed to fix the quality of audio recording during video, but resulted in non-functioning microphones during audio calls on various devices;

[-] - Other changes we may have forgotten about.

[+] - The module has learned to edit the deep buffer in the audio_policy file: now when applying bit rate and sample rate you will not be misled by wrong numbers when reading the dump;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v3.8 BETA [QCom Devices] Changelog

2023-12-02T13:46:48.466Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fix bootloop for Poco F5 & Redmi Note 12 Turbo;

[!] - Fixed audio stuttering when playing music via Bluetooth on some devices;

[!] - Fixed an issue that caused some devices to have problems with inability to adjust the volume of the talk speaker and its stuttering at the maximum volume level during audio calls;

[!] - Fixed module operation when installed in KernelSU (hereinafter referred to as KSU): previously, after installing the module, you might encounter malfunctioning mobile network and/or missing LTE;

[!] - Fixed patch_xml function: earlier it was malfunctioning due to incorrect logic of moving edited file to temporary Magisk/KSU folder;

[!] - Numerous audio fixes for the Mi 13 Ultra device: Now you should not encounter audio stuttering;

[!] - Fixed an issue where you could hear a program crackle in the audio track after recording through the device's microphones;

[!] - Fixed codenames of some devices;

[!] - Fixed a syntax error in the personal settings code for the Poco X3 (surya) device, which caused some parameters to work incorrectly;

[!] - Other changes we may have forgotten about.

[*] - Changed global HPHR & HPHL values from 24 to 20;

[*] - HPHR & HPHL settings for Poco X3 NFC (surya) device reduced from 24 to 18;

[*] - RX HPH MODE parameter changed from CLS_H_H_HIFI to CLS_LO_HIFI due to issues on a large number of devices;

[*] - Code refactoring for the 15th item of the installer: changed the logic of operation, added some necessary parameters and removed unnecessary ones;

[*] - Refactoring of installer item 10: removed a large number of parameters that were not tested for operability and efficiency, added new parameters;

[*] - Expanded parameters for installer item 14: now all possible effects are ignored, including system and non-system equalizers;

[*] - Parameters of decoders and encoders have been changed in favor of better audio processing;

[*] - The media_codecs variable now has a list of required files: this means that the audio codec enhancement will not affect unnecessary files that are not related to audio codecs but have the name of media codecs. Because of this, the installation will be a bit faster;

[*] - Updated MMT-EX to version 3.5 to work correctly with the latest versions of Magisk & KSU;

[*] - Changed value of AFE Input Bit Format parameter: should positively affect audio recording by built-in microphones;

[*] - Code refactoring for item 8 of the module installer;

[*] - Refactoring the code for the 8th point of the installer: the process of patching the necessary files within this point of the installer will be faster;

[*] - The file has been updated functions.sh for better compatibility with dynamic device partitions;

[*] - Other changes we may have forgotten about.

[-] - Removed DIRAC item with all files due to low popularity and not working within Android 14;

[-] - Other changes we may have forgotten about.

[+] - Added customized audio settings for Poco M3 series and Redmi 9T devices;

[+] - Now the module can search and work with files located in dynamic directories: odm, product, my_product, mi_ext, system_ext and others;

[+] - Added support for Mi 13 Ultra;

[+] - Added support for Mi 14;

[+] - Added support for Mi 14 Pro;

[+] - Added support for SD 8 GEN 2 & SD 8 GEN 3;

[+] - Added customized settings for Poco F5 & Redmi Note 12 Turbo device;

[+] - Added support for Realme GT NEO 2;

[+] - Added customized audio settings for Realme GT NEO 2;

[+] - Features have been integrated into the module to significantly improve the quality of audio recording through the built-in microphones of your device: the effect will vary from device to device. Somewhere you will hear a huge difference in recording quality, somewhere there will be no difference at all;

[+] - The module has integrated functions that significantly improve the quality of audio recorded using your device's microphones. They are activated if you use personal audio bit rate and sampling rate settings. The effect will be different for different devices, somewhere you will hear a huge difference, somewhere it will not be at all;

[+] - Added features that allow Pixel 6, Pixel 6 Pro, Pixel 7, Pixel 7 Pro devices to play audio with much lower audio compression: after installing this version, compared to the last one, owners of these devices will hear more details in the audio track, but do not forget that everything depends on the capabilities of your headphones;

[+] - A line has been added that disables the system Audio Spatializer, which prevents the correct playback of various frequency gradations;

[+] - Added the function of patching the resourcemanager file for new devices based on Android 13 and above: so far this function is in test mode and is available only to owners of the Poco F5 device;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v0.4 STABLE [MTK Devices] Changelog

2023-09-10T08:31:37.682Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed bootloops for some devices;

[!] - Fixed speakers for some devices;

[!] - Fixed microphones in voice calls;

[!] - Fixed incorrect installation for some OnePlus devices;

[!] - Other changes we may have forgotten about.

[*] - Change HiFi Volume prop 92 -> 90;

[*] - Update MMT-Ex Template to v3.4;

[*] - Update all parameters in STEP 9;

[*] - Downgraded minimal sample rate 96000 -> 48000 for all media codecs;

[*] - Increase max API 33 -> 34;

[*] - Other changes we may have forgotten about.

[-] - The script has been cleaned of shitty code;

[-] - Delete Dirac files and step;

[-] - Parameters relevant only for Qualcomm processors due to their inoperability on MTK processors have been removed from item 9 of the installer;

[-] - Deleted OTA: useless shit;

[-] - Other changes we may have forgotten about.

[+] - Add notification;

[+] - Add support for Helio A22;

[+] - Add support for Dimensity 8100 (Ultra & Max);

[+] - Add support system_ext, mi_ext, product, odm, my_product routes;

[+] - Update STEP 6: the module will attempt to unlock the impedance table for your headphones;

[+] - Add new parameters for STEP 10;

[+] - Add new STEP 11: Ignore all audio effects; When checked, the module will force the system to ignore any attempts to tamper with the audio path. This may cause various equalizers such as Dolby, V4A and others to stop working. Please be vigilant;

[+] - Add support OnePlus Ace;

[+] - Added modification installation progress bar;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v0.4 STABLE [MTK Devices] Changelog

2023-09-10T08:30:22.422Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed bootloops for some devices;

[!] - Fixed speakers for some devices;

[!] - Fixed microphones in voice calls;

[!] - Fixed incorrect installation for some OnePlus devices;

[!] - Other changes we may have forgotten about.

[*] - Change HiFi Volume prop 92 -> 90;

[*] - Update MMT-Ex Template to v3.4;

[*] - Update all parameters in STEP 9;

[*] - Downgraded minimal sample rate 96000 -> 48000 for all media codecs;

[*] - Increase max API 33 -> 34;

[*] - Other changes we may have forgotten about.

[-] - The script has been cleaned of shitty code;

[-] - Delete Dirac files and step;

[-] - Parameters relevant only for Qualcomm processors due to their inoperability on MTK processors have been removed from item 9 of the installer;

[-] - Deleted OTA: useless shit;

[-] - Other changes we may have forgotten about.

[+] - Add notification;

[+] - Add support for Helio A22;

[+] - Add support for Dimensity 8100 (Ultra & Max);

[+] - Add support system_ext, mi_ext, product, odm, my_product routes;

[+] - Update STEP 6: the module will attempt to unlock the impedance table for your headphones;

[+] - Add new parameters for STEP 10;

[+] - Add support OnePlus Ace;

[+] - Added modification installation progress bar;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub

NLSound v0.4 STABLE [MTK Devices] Changelog

2023-09-10T08:30:16.948Z

Designations: [+] - added, [-] - deleted, [*] - changed, [!] - fixes

[!] - Fixed bootloops for some devices;

[!] - Fixed speakers for some devices;

[!] - Fixed microphones in voice calls;

[!] - Fixed incorrect installation for some OnePlus devices;

[!] - Other changes we may have forgotten about.

[*] - Change HiFi Volume prop 92 -> 90;

[*] - Update MMT-Ex Template to v3.4;

[*] - Update all parameters in STEP 9;

[*] - Downgraded minimal sample rate 96000 -> 48000 for all media codecs;

[*] - Increase max API 33 -> 34;

[*] - Other changes we may have forgotten about.

[-] - The script has been cleaned of shitty code;

[-] - Delete Dirac files and step;

[-] - Parameters relevant only for Qualcomm processors due to their inoperability on MTK processors have been removed from item 9 of the installer;

[-] - Deleted OTA: useless shit;

[-] - Other changes we may have forgotten about.

[+] - Add notification;

[+] - Add support for Helio A22;

[+] - Add support for Dimensity 8100 (Ultra & Max);

[+] - Add support system_ext, mi_ext, product, odm, my_product routes;

[+] - Update STEP 6: the module will attempt to unlock the impedance table for your headphones;

[+] - Add new parameters for STEP 10;

[+] - Add support OnePlus Ace;

[+] - Added modification installation progress bar;

[+] - Other changes we may have forgotten about.

Support group: *CLICK*

Sources: GitHub