Open any chart, for example, https://www.tradingview.com/chart/?symbol=BINANCE%3ABTCUSDTPERP.

Proceed to click on your chart, as shown in the screenshot below, and add the indicator to the chart.

The indicator will then show up on the chart like the following.

Testing Strategy

Once the indicator is loaded, in the bottom window, you will be able to see the results on all time frames. We have included a default strategy for you for BTCUSDTPERP on 2 minute chart.

Creating Custom Strategy

If you feel that the current strategy does not suit you, you can create and test your own strategies. That can be done by clicking the settings option as shown below.

1. Move to the properties tab, Set your Initial Capital.

2. Change the Base Currency to USD

3. Order size must be set as per the leverage you wish to trade with. For example, if you are trading at 10x, your order size becomes 10,000 on a 1,000 Initial Capital.

4. Pyramiding can be set, this will sell your concurrent orders on each signal. We recommend you leave it at 1.

Now you can move to the input's and change the values as per your need and check the strategy tester window to see which one suits best for you.

Setting Up Automation

Automation can be done using various platforms, in this example, we are showing alertatron.

1. Login to your account and go to manage API keys as shown below.

Set your API Keys and a name for them. Make sure you have given "Futures Permission " to the keys from your exchange.

Next, we get the URL of the webhook from the incoming Alerts as shown in the screenshot.

Webhook URL

Now, go back to tradingview and open the indicator settings as shown below.

We fill the Bot Configuration Columns using the following value.

Message_long_entry: <yourapiname>(COINPAIR){ market(side=buy, amount=x%); } #bot

Message_short_entry: <yourapiname>(COINPAIR){ market(side=sell, amount=x%); } #bot

Message_long_exit: <yourapiname>(COINPAIR){ market(position=0, reduceOnly=true); } #bot

Message_short_exit: <yourapiname>(COINPAIR){ market(position=0, reduceOnly=true); } #bot

Sample Settings would look like this :

mj(BTCUSDT) { market(side=buy, amount=900%); } #bot
mj(BTCUSDT) { market(side=sell, amount=900%); } #bot
mj(BTCUSDT) { market(position=0, reduceOnly=true); } #bot

mj(BTCUSDT) { market(position=0, reduceOnly=true); } #bot


NOTE :

• Do not write BTCUSDTPERP, write BTCUSDT.
• If you are using X leverage with $100 capital in your account and put 90% of $100 to trade at X leverage, amount=90*X%
  Example
  For 10x leverage and $100 capital, amount will be 90*10 i.e amount = 900%.

Setting the Alert to trigger the webhook

Clicking the three dots would show the option as below. Choose Add Alert.

In the next window which opens, we set the webhook URL and erase everything in "Message box" and type the following in the Message box.

{{strategy.order.alert_message}}

Click on create and you're all set.

NOTES:

- We do not recommend using high leverage. High leverage is always risky. Use 10-15x.
- Set your binance future as follows (change leverage as per your preference) :

• Alertatron : https://alertatron.com/

Open any chart, for example, https://www.tradingview.com/chart/?symbol=BINANCE%3ABTCUSDTPERP.

Proceed to click on your chart, as shown in the screenshot below, and add the indicator to the chart.

›The indicator will then show up on the chart like the following.

To configure additional settings, click on the gear icon against the indicator name

SELL Indication

The screenshot below displays when a sell signal is given.

Buy Indication

The screenshot below displays when a buy signal is given.

We then change the settings from 55 to 34 as shown in the screenshot.

Here is an example of uptrend and downtrend being indicated on the graph.

Using TradeMe (SHORT)

Steps are simple, if the trendline is Red and the indicator shows "SELL", you SHORT.

Using TradeMe - LONG

Similarly, if the trendline is Green and the indicator shows "BUY", you LONG.

Setting Stop Losses

We recommend the stop-loss be set before the last swing high/low candle.

Here is an example of a stop-loss set on a SHORT trade.

Here is an example of a stop-loss set on a LONG trade.

Setting Alert

You can now set alert by clicking on the Indicator options as shown in the image below.

You can then set the Alert for your desired signals on the desired chart. The alert can be set for BUY, SELL, Long Take Profit and Short Take Profit signals.

Please note, if you are setting an alert on the 15 Minutes chart for BUY, you will get an alert when the next Buy appears on the 15-minute chart.

Take Profit Alert

Similarly, you can customize the percentage of profit you wish to achieve from the trade. By default, the value is set to 1 % and can be customized from the indicator settings as shown below.

Below is a screenshot of Long TP being shown on the chart.

The screenshot of the Short TP is shown below.

NOTE :

• Do not take the trade against the trend, If, the trend is up, do not take the sell signal and if, the trend is down, do not take the buy signal. Ignoring such signals is recommended.
• Put market buy/sell order after the candle closes. A candle close gives confirmed buy/sell signal.
• Don't enter the trade If the signal is behind a few candles, it's better to wait for the next signal than to enter late.
• The indicator can be used for any time frame. However, 15 minute and above is recommended.
• Always start with low position size. See how it performs before increase your position size (As per own risk).
• Do not go against the rules.
• Be patient. If you miss a signal do not get impatient and forget rules, this will ruin your trading account.
• Contact us on Telegram @dead0x. Do not believe anyone else who claims to be us.

HAPPY TRADING!