Smart Ptedictum is an improved version of the foreign indicator Indicātum/Predictum costing about 1200-2000$ per month. Smart Ptedictum is good on a volatile market, where there is a trend or a wide-range sidewall. It works best on low timeframes from 1 minute to 5 minutes. It is not recommended to work on timeframes older than 15 minutes.

Strengths:

• a large percentage of trades close very quickly
• for low timeframes/scalping
• signals are always trending
• future entry point, TP and SL are known in advance
• can be used as a ready-made strategy

Weaknesses:

• Weak in a sideways/consolidation pattern
• unsuccessful signals on false breakdowns, squeezes
• not suitable for timeframes older than 1 hour

Features:

• full-fledged backtest via built-in strategy tester
• more than 50 original "strategies" for different pairs and timeframes, mainly for medium-term trading
• 4 unique "strategies" from ASG, mainly for scalping
• ability to fully customize the indicator for yourself: your own sensitivity of signals, your own TP and SL, stop breakeven, backtest range, etc.
• possibility to connect auto-trading
• possibility to connect notifications (including in Telegram)

FUNCTIONALITY AND CUSTOMIZATION

To familiarize yourself with the settings, first, add the indicator to your chart. If you don't know how to do it, follow the manual below.

This item is responsible for selecting the preset "strategies". The pair and timeframe on your chart must match the pair and timeframe of the selected strategy. In the case of universal strategies, only the timeframe must be the same.

A strategy is a preset set of parameters such as "Signal Reliability", TP and SL.

This is mainly the functionality responsible for the visual part, and does not affect the algorithm in any way. When activating the "Use opposite signal as a stop loss" function, the indicator will perform calculations without taking into account the stop loss.

Here you enter the time range FROM and TO, within which the built-in strategy tester will calculate trades. Relevant for those who do not have a premium subscription to tradingview (if you have a premium subscription, it is better to use the "Testing on deep history" function - available in the strategy tester).

Our unique functionality (not available in Indicatum/Predictum)

If you select "On every Take-profit", real statistics will be calculated in the Strategy Tester section. If you set up notifications - you will receive notifications about reaching TP and SL. In case of setting up auto-trading by indicator - the bot will be able to trade taking into account Take Profits. If you select "On the back signal", the statistics will be calculated without taking into account TP and SL, alerts will come only when entering or preparing for a signal.

Our unique functionality (not available in Indicatum/Predictum)

Here you can enable the stop loss to be set to breakeven (at the entry price) after reaching the selected take profit. Stop loss will be set to breakeven even if you initially have the "Use opposite signal as stop loss" option active.

Our unique functionality (not available in Indicatum/Predictum)

This parameter is responsible for signal preparation alerts. When there is a specified percentage of movement left before the entry point (you should specify more than zero) - you will receive an alert to prepare for position entry (indicated by a single blue or red plus sign. The plus sign will be set at the price of the future entry point). To receive such an alert - when creating an alert you should specify "At any call of the alert() function", or in the column "Opening a position | Alerts" select "On preparation for a signal" and when creating an alert select "When filling an order".

Our unique functionality (not available in Indicatum/Predictum)

The "Manual strategy setting" parameter activates manual indicator settings, which you can enter in the fields below. The higher the parameter "Signal Reliability" is set - the rarer and more reliable the signals will be. The acceptable range is from 1 to 10, the basic value is 5. In the fields"Take Profit #1" etc. you enter values for setting TP and SL in percent of the entry point.

Our Contact

Adding an indicator to your chart is very easy. You need to go to your chart, open the "Indicators" tab (1), then go to the "Invates only scripts" section (2) and click once on the indicator you need (3). After that the indicator will appear on your chart (it may take up to 30 seconds)

If you don't see the indicator in the list, but access is definitely granted - refresh the browser/application page and the indicator will immediately appear in the list.

INDICATOR UPDATE

To update the indicator, if there has been an update: 1) Refresh the browser/application page; 2) Add the indicator to the chart; 3) Save the page. The previous version of the indicator, previously added to the chart, can be removed from the chart, or left to compare with the new one.

CUSTOMIZATION

After adding the indicator to the chart, hover over the indicator name in the upper left corner - the indicator management menu will pop up. Click on "the three dots" to open the indicator management menu. In it you can create a new alert specifically for the selected indicator, open the indicator settings, hide or remove it from the chart, etc.

Inputs - this is the main section of settings, usually under the phrase "Indicator Settings" you mean it. In it you can customize the algorithm itself, various filters, algorithm selection, etc. (depending on the indicator), sometimes you can customize the visual display of the indicator in it

Properties is a section of strategy settings, it is available only in indicators with built-in strategy tester, we have 2 of them: Smart Predictum and IQ Trend.

The documentation for the strategy tester is available here:

Style is a section of setting the visual display of the indicator style operators. In it you can change the color, style and thickness of display operators (e.g. TP, SL, different labels)

PROBLEM SOLVING

Sometimes indicators are displayed with an error: the chart is empty and there is a red mark with an error near the indicator name. Hover the cursor over it to find out the reason for the error

STUDY NOT AUTH OR "NO ACCESS"

It means that you no longer have access to this indicator, OR tradingview does not know that access is available yet.
There are two ways to solve the problem: 1) Pay the subscription for the indicator; 2) If the subscription is paid, access is granted, but the error is still there - refresh the page in your browser/application and the error will disappear.

"CALCULATION TIME OUT" OR ANY OTHER SIMILAR IN CONTENT

This means that the indicator has not had time to calculate in the allotted time. In regular tradingview subscriptions 20 seconds are given for calculation, in premium subscription - 40 seconds. If the indicator fails to load during this time, it will exit with an error
This error appears most often on low timeframes in indicators with complex algorithms, such as Trade Soul Smart Money, GG-Shot AI or IQ Trend. To make it not appear so often - you can simplify calculations, in case of GG-Shot AI, for example, disable Adaptive AI, in other indicators just disable the functionality you do not need at the moment
To remove this error is very simple: open the settings of the indicator, change any parameter back and forth and close the settings. This will force the indicator to reboot. Repeat until the problem disappears. If the error does not disappear, then you need to disable unnecessary functionality to the maximum, or move to a higher timeframe.

ALERT CALCULATION ERROR

In tradingview, not only indicators, but also notifications to the indicators fly out with errors. The problem is exactly the same as with "calculation time out", and the ways to avoid it in the future are the same.

You need to restart the notification: to do this, move the cursor over the required notification, the notification control panel will appear. Click the restart button. After that, the notification will restart.
After restarting, the alert may fail again after some time. In order to reduce the risk of the notification crashing - you can simplify calculations, in case of GG-Shot AI, for example, disable Adaptive AI, in other indicators just disable the functionality you do not need at the moment.
After you have simplified the calculations, the notification MUST be recreated. The notification created by you works independently: you can remove the indicator from the chart, change its settings, but it will not affect the notification. In order for changes in indicator settings to take effect, you need to create a new alert. You can delete an old notification.

Our Contact

Shark Trend is a trend indicator, with 4 optional filters and detection of the best signals, which it marks "Smart".

The signal indicator has a lot of additional auxiliary functionality, such as volume profile, orderblocks, trend lines, trend cloud, support and resistance zones, table with information on different timeframes. Also in the latest versions there are elements of SmartMoney concept (orderblocks, LL, LH, HL,HH).

By default, the indicator has "Consolidation signals filter" enabled - a powerful filter against sideways signals. Thanks to this, Shark Algo Premium does not give signals in different directions while the indicator is sideways (the main problem of most trend indicators).

Adding to the chart

Basic settings

Dashboard settings

Location, size and design of the dashboard. Everything is intuitive.

Buy and Sell signals settings

Show signals - enables and disables signals on the chart.

Strategy. Normal - standard working mode of the indicator. Confirmed - currently under development. TrendScalper (for traders familiar with scalping) - draws MAs of different periods and their intersections.

Sensivity - sensitivity of signals. The higher it is, the less signals on the chart, but they are more reliable.

Consolidation signals filter - does not pass signals on low-volatility flat market.

Smart signals only - displays maximally filtered signals on the chart.

Candle colors - colors candles in the color of the current signal.

Momentum candles - highlighting impulse candles. According to technical analysis, suggests further movement in the direction of impulse.

Risk Management settings

Enable trailing stop-loss - pulls up the stop-loss when moving towards the target. Percentage of triggering is selected in the checkbox below.

Enable Swing High's & Swings Low's - displays local price highs and lows on the chart.

Enable tare profit/ stop loss areas - displays profit taking and stop loss areas on the chart. Distances to TP can be adjusted independently.

Take Profit labels - displays TP price on the chart.

Trend cloud settings

Show Trend cloud - enable a simplified version of the Ichimoku cloud.

Trend cloud period - selection of data range for calculation. new - analog of mid term.

Trend only signals - skips only those signals that coincide in direction with the cloud.

Fast trend cloud - enable custom cloud calculation range. The period is selected in the window on the right.

Auto trendlines settings

Enable Auto Trendlines - enable display of the trend channel on the chart.

Trend channel source - select the mechanics of charting.

Trend channel loopback - select the building range (number of counted candlesticks).

Auto support and Resistance settings

Enable or disable the display of support and resistance levels. Line Style and Line Width - customize their design.

Consolidation Zones

Enable or disable consolidation zone display

Loopback period - search range for consolidation zones

Min Consolidation Length - minimum range length for consolidation zone identification

Oderblock

Toggle Order Block - enable/disable the display of orderblocks.

Hide gray boxes - enable/disable display of previously defined orderblocks.

MSB trigger - selects the mechanics of orderblock detection.

Plot demand boxes - display areas of customer interest.

Delay to count test of demand box - the number of candles that are in the order block for it to be considered tested.

Delay to count filling of demand box - the number of candles in the order box for it to be considered completely filled.

Dim tested demand boxes - hide tested demand boxes.

Stop plotting filled demand boxes - do not display filled demand boxes on the chart.

Shark Volume profile

Shark volume profile - enables displaying the volume profile on the chart.

Offset - distance of the histogram to the chart.

Loockback - select a range for data analysis.

Numbers of levels - number of columns in the histogram.

Level width - height of bars.

Example of trading by signals

After receiving the signal we make a decision to enter the deal. In addition to the signal, the fact that the oscillator shows a downward movement and crossing of the median is a confirming factor for shorting. Also, the volume profile tells us that at the moment the volumes for selling are higher than for buying.

If the decision to enter the deal is made, we set a stoploss either according to the indicator recommendation (indicated on the label) or logical (for the nearest high). You can set take profit orders at once, or, when moving in the right direction, gradually move stoploss first to breakeven, then to profit (trailing stop).

Profit can also be fixed evenly when each TP is reached (do not forget to transfer the deal to breakeven).

In the screenshot on TP2 you can completely exit the trade, as the oscillator has detected a bullish divergence.

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/

GG-Shot AI is an improved version of the foreign indicator GG-Shot, costing about $800 per month. It copes well with sideways movements, compared to other trend indicators. It works equally well on any timeframes within 1 minute to 1 day

Advantages:

• very easy to set up and trade on it
• suitable for almost any pairs and timeframes
• signals are almost always trending
• can be used as a ready-made strategy

Weaknesses:

• relatively weak in a sideways/consolidation environment
• heavy algorithm, may crash with errors (need to reboot)

Features:

• calculation of real signal statistics: separate profit and winrate for each TP individually, taking into account all stops, rollovers, etc.
• automatic search for the most profitable, unprofitable and most optimal settings for each pair and timeframe
• automatic selection of the most profitable settings via built-in AI
• in the settings there are pop-up tips with a detailed description of the functionality and recommendations for customization
• possibility to fully customize the indicator for yourself: your own sensitivity of signals, your own TP and SL, stop to breakeven, backtest range, etc.
• possibility to connect auto-trading
• possibility to connect notifications (including in Telegram)

FUNCTIONALITY AND CUSTOMIZATION

To familiarize yourself with the settings, first add the indicator to the chart. If you don't know how to do it, follow the manual below.

Almost every item on the right has a tooltip with a detailed description of the functionality for which the item is responsible. Hover your cursor over the corresponding label on the right to see the description

This item is responsible for selecting presets - preset sets of parameters such as Signal Sensitivity, TP and SL. The presets are divided into 3 groups:

Basic (original) tuning presets. To use them, you need to select the pair and tf according to the preset name. The settings of basic presets cannot be changed

Adaptive presets. They can be used on any pair and timeframe. All settings are automatically selected on the basis of the most profitable, or the most optimal settings at the current time. The ratio of TP and SL, their style can be changed in the manual settings section.

Manual settings. They can be used on any pair and timeframe. All settings are selected by you manually in the manual settings section. Signal sensitivity, TP and SL, their style can be changed in the manual settings section.

We recommend using adaptive presets, or customizing the indicator manually. The basic presets are 1in1 with the original settings and can be recommended for use only as a tutorial, or to compare with the original GG-Shot

This item is responsible for selecting the "Trade Mode" or in simple words, what style of position fixing you will use.

Standart - display of limit take profit lines and dynamic take profit markers.

Advanced - display of the trading channel with zones for profit taking.

We recommend that you always use the default mode

This item is responsible for the display style of the backtest panel. PC version, PC version with larger font and mobile version are available.

The only difference between these modes is the display style. They give the same information

This item is responsible for the intensity of additional signal filtering. If the value is 0 - filtering is disabled, the maximum value is 3.

It affects only the processing of current signals (in case of using adaptive presets), i.e. enabling filtering will not affect the calculation of the best, optimal and worst settings, they will be calculated without taking filtering into account, and the result of these calculations (final signals) will undergo additional filtering.

We recommend using a value of 0 or 3. Intermediate 1 and 2 may be needed for more fine-tuning in individual cases. Before making a decision, we recommend to check the trading performance through backtest panel first with value 0, then with value 3.

This item is responsible for displaying support and resistance zones. They can be used as target zones for additional or reduced positions in accordance with the main signals.

We recommend using only as a supplement to the main signals.

This item is responsible for displaying the signal preparation warnings. It is not an input signal, but only a preparation signal.

We recommend setting up alerts to prepare for a signal at once, and not only display them on the chart (if you want to be warned about an imminent signal, which may be relevant when trading on TFs below 1 hour). This item does not affect the alerts.

This item is responsible for displaying the triggering marks of dynamic TPs. Dynamic TPs are used as additional triggers for partial position fixing in addition to the main limit TPs. Dynamic TPs do not take part in AI calculations, it is just a trigger to look at the chart and think again whether it is worth to reduce the position, or to pull up the SL to profit.

We recommend setting up alerts for triggering of dynamic TPs at once, not only displaying them on the chart. This item does not affect alerts.

This item is responsible for displaying labels of triggering signals for bounce on the oscillator.They are displayed as pluses on the chart. They can be used as additional signals to add or reduce a position in accordance with the main signals.

We recommend using only as a supplement to the main signals.

This item is responsible for the operation of Max Algo Adaptive AI. After starting Max Algo Adaptive AI, you will be able to use adaptive settings presets, and the statistical panel will be updated with new data.

Max Algo Adaptive AI is a complex algorithm that requires relatively long time for calculations. After it is enabled, the indicator will take longer to load and will crash with errors more often.

We recommend using Max Algo Adaptive AI only when you need working adaptive presets, or when you want to calculate statistics

This item is responsible for profit calculations in the statistical table, affects the work of adaptive presets and the results in the backtest panel:

Signals - trading results will be calculated based on signals (without TP and SL, the position is closed only on the reverse signal);

Signals and TP - trading results will be calculated on the basis of signals and TP (without considering SL, position is closed on TP or reverse signal);

Signals and TP and SL - trading results will be calculated on the basis of signals, TP and SL.

We recommend using the base value. Change only if your strategy involves trading without stop-loss or take-profits

This item is responsible for filtering signal alerts. It does not affect the display of signals on the chart.

For example, if you set the value to 50 - signal alerts will be sent only if the percentage of profitable presets (Profitable settings presets - parameter from the extended statistics) at the moment of receiving a signal is higher than 50. If the percentage of profitable presets falls below 50 - signal alerts will not be sent. MA Adaptive AI must be running for this filter to work.

We can recommend to put this filter if you use algo-trading or just do not pay attention to the statistics panel (it is not obligatory)

These items are responsible for manual setting of the indicator:

Signal sensitivity works according to the following principle: lower value - more frequent signals, higher value - less frequent signals. In order to apply the value - in the item "Settings Presets" Manual settings should be selected (at the very bottom)

The TP and SL values work differently depending on the selected settings preset:

If one of the adaptive presets is activated - works as a percentage indentation from the signal entry point (additionally can be adapted in the corresponding item below)

If one of the adaptive presets is activated - works as a multiplier with which you can change the distance from the entry point in CONDITIONAL values (not in percentages)

If one of the base (original) settings presets is activated - does not affect anything. You cannot change the settings of the base presets.

We recommend using manual settings instead of the basic original presets if you are not suitable for adaptive presets for one reason or another

This item is responsible for selecting the type of stop loss. There are two types of them:

Fixed SL - calculated from the entry point on the signal and does not change until the next signal;

Trailing SL (Original) - is calculated from the Trend Line and moves in line with it. Accordingly, when setting the SL manually, the indentation will be specified from the Trend Line, not from the entry price on the signal.

We recommend using a fixed stop loss when algo-trading, or if you do not want to pull up the stop loss from time to time in accordance with the original trailing stop loss.

This item is responsible for transferring the stop loss to breakeven (to the entry price) after a certain take profit is reached.

Regardless of the selected stop loss type, when activating stop loss to breakeven, the stop loss will be moved to breakeven (to the signal entry price) after the selected take profit is reached.

Transferring an SL to breakeven can give both positive and negative results. It is recommended to compare the results with and without moving SL to breakeven before making a decision

This item is responsible for selecting the optimal take profit and stop loss based on the selected pair price, volatility and selected sensitivity settings.

Can adapt take profit and stop loss only if one of the adaptive presets or manual indicator settings is selected (not applicable for basic (original) settings presets).

We recommend using this parameter on a permanent basis, even if you do not use adaptive presets. It will save you time in selecting optimal values for TP and SL settings

These items are responsible for the backtest period. Calculations, including AI will be made based on the time period specified here, or the maximum available time period on the selected chart.

Useful when you need to know statistics for a certain period of time

BACKTEST PANEL

The backtest panel can be divided into 4 conditional parts. The first part displays information about the selected preset, pair, timeframe and the time when the first signal was received.

The second part of the backtest panel displays statistics on reaching each TP separately (only limit take profit, dynamic TPs do not take part in calculations). Take Profit is considered to be reached, if at the moment of its achievement Stop Loss was not taken out and the deal was still valid.

Although the statistics on reaching the TP can tell you at which TP to fix the main part of the position, we do not recommend to judge the trading performance based solely on this data, and here is why:

A trade may reach, for example, 3 TPs, but then the price will hit a stop that is too huge, and the trade will end up losing, although it would seem that the take profit statistics were excellent;

Similarly, the price may not reach the TP, but the deal will close in profit on the reverse signal or trailing stop loss. A trading pair can make good profits even with mediocre TP achievement statistics.

The third part of the backtest panel shows the result of trading, if you fix the trade completely on one separate take profit.

The result is calculated taking into account the stop loss, all rollovers (reverse signals) and ONE take profit, without taking into account the commission. That is, as if you were trading in reality, following the trading strategy according to the GG-Shot AI indicator, but using only ONE take profit to fix the position completely.

Gross profit is cumulative profit (total profit from all profitable trades);

Gross loss is the cumulative loss (total loss from all losing trades);

In the original GG-Shot indicator, this part of the backtest panel is calculated incorrectly, constantly overestimating profitability and ignoring most of the losses. In our GG-Shot AI statistics is calculated correctly, showing only real results of trading on the indicator.

The fourth part of the backtest panel displays the calculations of the built-in Max Algo Adaptive AI. This part of the panel is displayed only when Max Algo Adaptive AI is running in the settings, and is available only in our GG-Shot AI indicator.

Strategy - this is the selected strategy of profit taking (only signals, signals and TP, signals and TP and SL). You can choose a strategy in the indicator settings.

Profitable Settings Presets - this is the percentage of profitable settings out of all possible settings at a given time (on the left) and the average percentage of profitable settings out of all possible settings for the whole time. We will tell you how to use this information in practice in the next section of the manual.

Current - this is the result of trading for the selected period of time. Real figures including partial fixing on 4 TPs, SLs, all reversals (reverse signals), etc., without taking into account the commission. That is, as you would trade in reality, clearly following the strategy of trading on the indicator GG-Shot AI.

Optimal, Best, Worst - this is the most optimal, best and worst sensitivity setting at a given time and the result of trading on it. That is, if you had been trading with signal sensitivity 450 (Best in the table above) all the time - you would have earned 183.5% at the current moment of time.

HOW TO CHOOSE PROFITABLE PAIRS AND TF

To search for profitable pairs, TFs and settings, we will use a part of the panel with our AI, which we have implemented in the GG-Shot AI indicator just for this purpose.

Our AI calculates the result of trading on the selected settings (Current) and the percentage of profitable settings. This data is enough to find pairs, TFs and settings that have brought good results in the past, and are likely to bring results in the future.

First you need to customize the indicator. Select Adaptive Optimal in the settings presets. This completes the indicator setup. AI itself will optimize the indicator for the selected trading pair and timeframe: it will choose the most optimal setting of signal sensitivity, TP and SL values.

Then we move on to the selection of pairs and tf. The first most important parameter, or group of parameters, for selecting trading pairs and tf, is the result of trading on the selected settings for the whole time (Current), and the potential result of trading on the most optimal settings at the moment (Optimal).

Optimal - the most optimal sensitivity setting at the moment and the result of trading on it. That is, in this case, if you were to trade at the 560 setting all the time, you would earn 126.89%. The Optimal parameter is dynamic (as well as best, worst) - in different time intervals, different settings are considered to be the most optimal.

Current - currently selected sensitivity setting and profit on it. If you had manually selected 560, the profit result would be the same as in the Optimal column. But, since the Adaptive Optimal preset is selected in this example - the sensitivity value is automatically set to the one currently defined in the Optimal column. Right now it's 560, yesterday it could be 540, and tomorrow it could be 620.

In this example, Current is the result of trading if you always choose the sensitivity that our AI determines as the most optimal, while Optimal is the result of trading if you always trade at the setting that is determined as optimal right now.

That is why the results in the Current and Optimal columns are different when selecting the Adaptive Optimal preset. Current is the real trading result, according to the signals you see on the chart, which the indicator has produced for the whole time based on the Adaptive Optimal settings preset.

If you don't understand any of the above, you don't need to. Just follow our simple recommendations. You don't have to understand how it works

We recommend choosing pairs and timeframes where the result in the Current and Optimal columns is at least above 10-20% for 5m-15m, and above 40-60% for 15m-1h (the more the better). Also pay attention to the backtest range: if you do not have a Premium subscription to tradingview - you have less data to process and accordingly the profit that can be considered good will be less by 1.5-2x times.

The second of the two most important parameters for selecting trading pairs is the "Percentage of profitable settings". This is the percentage of all tested AI possible settings for the GG-Shot AI indicator that made a profit on the pair and timeframe you selected, with the settings you selected.

The left (84%) shows the percentage of profitable setups at that moment in time, while the right (77%) shows the average percentage of profitable setups over the whole analyzed time.

Roughly speaking, the percentage of profitable settings is the probability that choosing a pair and tf with a conditional profit of "330.1%" and trading it in the future, you will also get a good result in terms of profit.

For example, if the percentage of profitable settings is low, it will mean that the high profit is more of a coincidence than a pattern, and with a high probability you will not get the same good results in the future.

We recommend choosing pairs and timeframes where the percentage of profitable setups is higher than 70-80%. Pairs and timeframes where this percentage is lower than 50-60% should not be traded

Our Contact

Works well in unstable conditions, in wide ranges or on powerful moves. Not particularly suited for tight flatness.

Recommended timeframes from 15m.

Adding an indicator to a chart

Basic settings

The indicator has only 2 sensitivity settings, and there are no correct ones. Either use the default settings, or select your own settings on different coins and timeframes to find the best option in terms of efficiency (however, this does not guarantee similar signal performance in the future).

Briefly on how to trade

All the lettering on the chart is very clear:

Buy - open long after the candle is formed
Sell - short
TP - profit taking zone (percentage at your discretion)
AVG - averaging (if your trading strategy allows it)
SL - stop loss setting level

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/

Includes:

• Working backtest and possibility to connect auto-trading (if this function is enabled, REAL statistics on indicator trades will be calculated with the help of TradingView strategy tester. Also, if auto-trading is enabled, the bot will trade taking into account take-outs and stops).
• More than 50 different strategies for different pairs and frames + universal settings for crypto markets
• Full customization of the indicator
• Alerts to prepare for a signal

Adding an indicator to a chart

Basic settings

By default, after adding the indicator to the chart, the parameters for BTCUSDT - Spot 4h are selected in the "Strategy" item. You can choose a strategy from the proposed ones (don't forget to switch to the desired pair and timeframe), or customize (and test) the strategy manually in the settings below.

All other settings are either intuitive or have explanations in the form of a pop-up window.

Briefly on how to trade

Entry: the pluses (red/green) are visible on the chart. They indicate that when the asset price reaches this level, a signal (short or long respectively) will appear.

In these places you can place limit orders to buy (in the case on the screenshot) or to sell, if they are red pluses.

Or you can wait for a long or short signal and enter the market (as in the screenshot below).

Exit: At take profit line, at stop loss, at reverse signal (or at your own discretion)

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/

Basic settings

In general - the settings concern the display of the indicator functionality and design on the chart. All items should be understandable if you are familiar with the Smart Money concept

Functionality:

• Defines Orderblocks on a chart
• Identifies Premium/Discount Zones
• Highlights important High/Low days, weeks, months
• Identifies MBOS and BOS
• Liquidity
• Imbalance
• Highlights EQL & EQH

Works for all assets and frames.

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/

This is a reversal indicator, so it is great for working on flat and clear ranges (with caution it should be used on strong movements, it is better to use Ignatum/GG/Trade Soup on them).

Functionality:

• Long/Short signals with TP/SL zones
• Large Buy/Sell Display
• Range display
• Variable signal filtering (including FOMO channel)

Adding to the chart

Basic settings

Take-profit zone - displays the zones in which it is recommended to place take-profit orders

Stop-loss zone - displays the zones for which it is recommended to place stop-loss orders.

Whale purchases - displays large purchases/sales on the chart

Correlation with BTC - displays the level of correlation of the asset with bitcoin.

Trend bars / MaxAlgo real trend fix - candlestick highlighting will display the current trend

Support and resistant levels - displays the range boundaries

Reaction filter - skips only those signals that were accompanied by a price reaction

Whale filter - skips only those signals that appeared after large purchases or sales.

FOMO filter - skips only those signals that appeared after touching the fomo-channel boundaries.

FOMO filter multiplier - adjusts the width of the FOMO channel.

Minimal signal strenght - the higher the signal strength, the higher the probability of working out and the higher the signal potential (but in this case there will be fewer signals).

Briefly on how to trade

In general, the indicator has quite transparent settings and intuitive interface on the chart. Enter the deal after the signal is fixed on the chart (at the close of the candle).

Stop loss is placed FOR the stop loss zone (red area).

Take profit orders are placed In the take profit zone.

We sincerely recommend using IQ Trend in conjunction with FOMO for maximum efficient analysis.

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/

Adding an indicator to the chart

Basic settings

The condition for a signal is at what moment the signals will be displayed on the chart. There are 2 variants: on touching the channel boundaries (one signal in the weak/medium/strong overbought/oversold zone); or on touching the channel and the subsequent rebound (on candle closing above the channel boundary).

Pause after the signal - the number means the number of candlesticks on which signals will NOT come, provided that the signal was just received.

Channel multiplier - is responsible for channel width. Default value is 1.5. The lower the value, the wider the boundaries, the higher the value - the wider the boundaries.

Display signals on the chart - if this checkbox is enabled, signals by selected settings will be displayed on the chart.

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/

Adding to the chart

Basic settings

Enable dashboard - enable/disable the label with related information for asset analysis. There are 2 types of label to choose from: basic and PRO (they differ in the amount of information data).

Dashboard distance - distance of the label from the last candlestick of the chart.

Signal sensitivity is a parameter that affects the quantity and quality of signals. Lower sensitivity - more signals, but usually with worse passability. Higher sensitivity - less signals, but their quality is better. Default value: 180.

Briefly on how to trade

Chart symbols:

Long - open long after the candle formation
Short - short
Target - profit fixation zone (percentage at your discretion)
StopLoss - level of stop loss setting

If you have any questions about how to use it: https://t.me/MaxAlgoAdmin

Purchase a subscription and learn more about the project: https://t.me/maxalgo_bot

Our website: https://maxxalgo.com/