Passcode +Disabled iCloud OFF

This service is suitable for everyone who uses iPhone / iPad, but for some reason forgot their screen lock password. Complete disable iCloud.

The success of the service is 90% of cases.

Using this service, you can use your device to the fullest, without restrictions. Create a new iCloud, make calls, install any applications, pay for purchases, including Face ID, in general, there will be no restrictions.

The time for receiving the service is 1-8 hours on business days from 10:00 to 19:00 (Moscow time). Saturday, Sunday and public holidays there may be delays. Our telegram account for communication https://t.me/three_tools_gsm

Limitations:

Supported devices only with software version from 12.3.х. to 14.x.x.
Supported lineup: iPhone SE, iPhone 6s / 6s Plus, iPhone 7/7 Plus, iPhone 8/8 Plus, iPhone X, iPad Pro 9.7, iPad Pro 10.5 2017.

If you are ready to use this service, you need to:

Make 100% prepayment.
Follow the instructions below.

Instructions (if you have Windows installed on your PC)

You will need:

PC or Laptop with 32/64 bit Windows;
USB flash drive with a capacity of 256 MB or more;

Download ISO for recording to a USB drive;

Download the BalenaEtcher utility for burning an ISO image to a USB drive;
FlexiHub to provide access to the you device.

CPU-Z will help you find out which processor you have on your PC

Further you carry out the following actions:

Launch BalenaEtcher.

Select the “checkn1x.iso” image you downloaded earlier, select the USB drive on which you want to deploy the image, press FLASH.
Restart your computer and enter the boot menu, usually called by pressing F12 or Delete. If you don’t know how to enter the download menu on your PC, read Google.
Select the boot from the flash drive, after which you will be taken to the Checkra1n GUI.

Put your device into Recovery mode.

Connect your device to the PC and press [START].
Attention! If the [START] button is not active, you need to select [OPTIONS] and put a checkmark in front of the [Allow untested ...] item, if the [START] button is again inactive, then additionally put a checkmark in front of the [Skip A11 ...] item, then press [START].

Checkra1n will notify you of the need to put your device into recovery mode, press [NEXT]. The program will do everything automatically.
After the device has been switched into recovery mode, Checkra1n will ask you to put your device in DFU mode, do this by following the instructions on the screen, then press [START].

After the device exits DFU mode, do not turn it off and wait for the process to complete. If everything worked out, you will see the message All Done.

After successfully activating the jailbreak, disconnect the device from the PC, reboot and start the PC in normal mode and reconnect the device.
Install and run FlexiHub. Log in with a token sent by a 3ToolsGSM specialist.
Tell 3ToolsGSM employees the name of your PC (for example: DESKTOP-H8L82E6), as well as the S/N device.

Instruction (for MAC users)

Activate jailbreak with checkra1n

Download and install FlexiHub.

Install and run FlexiHub. Log in with a token sent by a 3ToolsGSM specialist.
Tell 3ToolsGSM employees the name of your PC (for example: DESKTOP-H8L82E6), as well as the S/N device.