Vodka + Seledka EN
March 9
How to connect a raspberry to the Internet using an external WIFI adapter?
Connect to the IPARMOR network
Open a terminal
On Windows
win+R
cmd
On the MacBook
Open Finder and open the "Terminal" app
On Linux
Ctrl+Alt+T
Connect to Raspberry via ssh
Via Terminal
ssh [email protected]
raspberry
Через Putty
A window will open and write there
pi
raspberry
Write further
cd rtl8812au/ sudo make dkms_remove make clean sudo make dkms_install
Wait a little and in the end you should see
DKMS: install completed.
dkms status
8812au, 5.6.4.2_35491.20191025, 5.10.17-v7l+, armv7l: installed
wireguard, 1.0.20210124: added
If you haven't seen it, do it all over again
Next, take the adapter and insert it into the blue port (usb 3.0)
Then go to http://192.168.44.1:3000/system (Settings tab)
In the list of usb adapters opposite yours, select "External WI-FI adapter"
Click on the "SAVE" button
Reboot the raspberry
Reconnect to the "IPARMOR" network
Then go here http://192.168.44.1:3000/networks/wlan0 ("WI-FI" tab)
Click on the "EXTERNAL WI-FI ADAPTER" button
Connect to the desired network
If everything is fine, you will receive such a notification
March 9, 10:55
0 views
0 reactions