Vodka + Seledka EN
July 10

Hardware Requirements for Vodka + Seledka Firmware

Raspberry Pi

Recommended models:

  • Raspberry Pi 4 (4 GB RAM or more)
  • Raspberry Pi 5 (4 GB RAM or more)

For the best experience, we recommend a model with at least 4 GB of RAM.


Cooling

Use a case with active cooling.

Most Raspberry Pi kits include fairly noisy cooling solutions. For quiet and reliable 24/7 operation, we recommend ARGON cases.

Active cooling is required for stable long-term operation.

If you purchase a Raspberry Pi kit, the included microSD card and USB card reader are often low quality. For maximum stability, we recommend purchasing them separately.

Recommended ARGON cases

For example:

  • Argon NEO — Raspberry Pi 5
  • Argon ONE — Raspberry Pi 4

Power Supply

We recommend using:

  • the original Raspberry Pi power supply;
  • or a high-quality USB Type-C power adapter with sufficient output.

Recommended power

  • Raspberry Pi 4 — 15 W or higher
  • Raspberry Pi 5 — 25 W or higher

Whenever possible, use a standard power adapter with stable continuous output. Universal (“smart”) chargers may provide less stable power.

Original Apple power adapters with sufficient wattage have also proven to work well.

Use a high-quality USB Type-C cable as well.

Insufficient power may cause freezes, random reboots, or other stability issues.


microSD Card

For reliable operation, use only high-quality microSD cards.

Minimum specifications

  • A1
  • U3
  • V30
  • UHS-I

Most Recommended Series

⭐ Industrial

  • PRO
  • Endurance
  • High Endurance
  • MAX

These series are designed for a high number of write cycles and provide maximum stability for 24/7 operation.

Recommended memory cards

  • Kingston Industrial
  • SanDisk Max Endurance
  • Samsung PRO Endurance
  • Kingston Endurance
  • SanDisk Extreme PRO
  • SanDisk High Endurance
  • Transcend High Endurance
  • SanDisk Extreme
  • Kingston Canvas Go! Plus
  • Samsung EVO Plus

Acceptable Alternatives

If the recommended series are unavailable, you can also use:

  • Samsung EVO Plus
  • SanDisk Extreme
  • Kingston Canvas
  • Kingston Canvas Go!

These cards work well but have a lower write endurance than the Endurance and PRO series.

Not Recommended

(If you experience firmware issues, Support will most likely ask you to replace the microSD card first.)

Avoid using:

  • SanDisk Ultra
  • Kingston Select
  • Budget cards without a clearly identified product series

These cards wear out much faster and are one of the most common causes of Raspberry Pi instability.


USB Card Reader

If your computer already has a built-in SD/microSD card reader, you can use it.

Otherwise, we recommend purchasing a quality USB 3.0 card reader from a reputable manufacturer.


Done

Once your hardware is ready, you can proceed with flashing the IPArmor image to the microSD card.


Additional Equipment

(Optional)

Depending on your setup, you may also need the following devices.


Wi-Fi Adapter

Most USB Wi-Fi adapters can be used to connect your Raspberry Pi to a Wi-Fi network instead of using an Ethernet cable.

Recommended adapter

TP-Link Archer T3U Plus

⭐ List of adapters that support multiple Wi-Fi Access Points

Vodka VPN

USB Type-A → Ethernet (RJ45) Adapter

Allows you to add an additional Ethernet (LAN) port via USB.


USB Type-C → Ethernet (RJ45) Adapter

May be required if:

  • you need to connect a smartphone or tablet via Ethernet;
  • your laptop does not have an Ethernet port (for example, a MacBook).

Powered USB Hub

Recommended when using:

  • multiple USB Wi-Fi adapters;
  • USB modems;
  • SSD drives;
  • a large number of USB devices simultaneously.

The Raspberry Pi’s built-in USB power may not be sufficient to reliably power multiple devices at the same time.