Vodka + Seledka EN
August 9

PPTP Protocol on Vodka + Seledka Firmware

Checking Connectivity

Before adding a configuration, it is recommended to verify that the server is reachable using @vodka_check_bot .

Adding a Configuration

Click Add Configuration and fill in the following fields:

  • Host β€” IP address or domain name of the server.
  • Username β€” login/username.
  • Password β€” password.
  • Description β€” any name for your convenience.
  • Encryption β€” enables PPTP encryption. Some servers require encryption to be enabled, while others only work with it disabled.

DNS Configuration

Choose which DNS should be used after the PPTP connection is established.

Available options:

  • DNS from Config β€” use the DNS servers provided by the PPTP server.
  • DNS from Config TCP β€” use the DNS servers provided by the PPTP server, but send DNS queries over TCP instead of UDP.
  • DNS from Config w/o public β€” use only private (non-public) DNS servers received from the PPTP server. For example, if the server provides 10.0.0.2 and 1.1.1.1, only 10.0.0.2 will be used.
  • DNS from Config w/o public TCP β€” same as above, but DNS queries are sent over TCP. For example, if the server provides 192.168.50.1 and 8.8.8.8, only 192.168.50.1 will be used.
  • DNS from IP address β€” use the server’s IP address as the DNS server.
  • Remote IP β€” use the local PPTP tunnel address to attempt to obtain the original DNS servers when the server provides only public DNS servers.
  • DNS from Google β€” use Google DNS (8.8.8.8, 8.8.4.4).
  • DNS from Cloudflare β€” use Cloudflare DNS (1.1.1.1, 1.0.0.1).
  • Not change β€” keep the current DNS settings unchanged.

Connecting

After completing the configuration, click Connect.

You can verify the current connection using https://404.vodka/ip-check/ or any other IP checking service.

Important

The DNS setting selected in the PPTP tab is applied only when the PPTP connection is established or reconnected.

If you need to change the DNS while PPTP is already running or configure it manually, use the DNS Settings tab.

⭐ Note

In Vodka + Seledka firmware, the protocol chain can look like this:

Internet β†’ VODKA β†’ PPTP β†’ WireGuard / OpenVPN β†’ SOCKS (Proxy) β†’ Device

Within the firmware, PPTP can only operate after the VODKA protocol and cannot be placed after WireGuard, OpenVPN, or SOCKS (Proxy) due to technical limitations of the PPTP protocol.