Vodka + Seledka EN
July 8

Connecting an External Wi-Fi Adapter (Wi-Fi Client Mode)

1. Connect the adapter

Plug the Wi-Fi adapter into the USB 3.0 (blue) port on the Raspberry Pi.

Then open:

Settings → USB Adapters

2. Assign the external Wi-Fi adapter

In the USB Adapters section, locate the detected Wi-Fi adapter.

Set its role to:

External Wi-Fi Adapter

Then click:

Save

3. Reboot the device

After saving the settings, reboot the device.

4. Connect to your primary Wi-Fi network

After the device has rebooted, open the:

Wi-Fi tab.

At the top of the page, select:

External Wi-Fi Adapter 1

Then set the adapter mode to:

Wi-Fi Connection

Select your primary Wi-Fi network, enter the password, and click Connect.

Done

Your external Wi-Fi adapter is now operating in Wi-Fi Client Mode and connected to your Wi-Fi network.