Connecting an External Wi-Fi Adapter (Access Point Mode)
1. Connect the adapter
Plug the Wi-Fi adapter into a USB 3.0 (blue) port on your Raspberry Pi.
2. Assign the external Wi-Fi adapter
In the list of detected USB adapters, locate your Wi-Fi adapter.
3. Reboot the device
After saving the settings, reboot your Raspberry Pi.
4. Enable Access Point mode
At the top of the page, select:
Then change the adapter mode to:
5. Reboot the Raspberry Pi
After the reboot, your new Wi-Fi network will be available for devices to connect.
To access the web interface, open the address shown in the IP Address field, for example:
6. Configure the Access Point
For the best performance, we recommend using the 5 GHz band if your Wi-Fi adapter supports it.
Additional Information
If your Wi-Fi adapter supports creating multiple access points simultaneously, you can configure several Wi-Fi networks on a single adapter.
https://teletype.in/@404vodka/oAbdXYiee6w
Recommendation
When using two or more external Wi-Fi adapters, the Raspberry Pi may not be able to provide enough power through its USB ports.
In this case, we recommend using a powered USB hub (a USB hub with an external power supply).