Six Easy Ways to Fix Netgear Extender is Not Working Issue

Is your Netgear extender not working fine? Does your WiFi extender keep disconnecting continuously from internet? Are you looking for some solid solutions to fix these issues? If so, then have you landed on the right web page. In this column you will find all the solutions that helps you to get rid of these issue with a short span of time. So, let’s roll the balls!

Solution #1: Position of your Netgear WiFi Extender

During the Netgear extender setup, try to position your extender device in the same room where the router is placed. If possible, try to place both the devices 1-3 feet apart from each other.
Do not keep your router behind the cupboard or wardrobe or inside the drawer. This limits the wireless signals strength and range.

Solution #2: Placement of Netgear Extender

Try to place your WiFi range extender in the center of your home.
Keep your WiFi extender in-between your home WiFi router’s network and dead network spots.
Prevent your extender from radio interference devices like radios, televisions, microwaves, ovens, Bluetooth, cordless phones, fish tanks, mirrors, and silver-coated surfaces.
Don’t hide your WiFi extender behind the concreate walls, metal doors, and near the glass windows.
Place your WiFi extender at a higher from the ground level (nearly 5-6 feet above). So that the extender can easily blanket every corner with WiFi signals.

Solution #3: Connect to the Right Network SSID Name

Make sure that you have connected your WiFi-enabled devices to the correct network SSID name.
If you are trying to connect your WiFi devices to extended network, then try to connect to mywifiext net network.
If you try to connect your device to a third-party network, then you might face ‘Netgear extender not working’ or ‘Netgear extender is not connecting to internet’ issue.

Solution #4: Disable Guest Network

To make your WiFi extender running well and up, make sure that you have disabled the guest network feature. Heavy traffic can majorly impact your Netgear extender performance.

Solution #5: Update Your Netgear Extender Firmware

Netgear periodically keeps on releasing latest firmware version to fix internal WiFi extender software issues or to enhance the hardware performance. If you haven’t updated your extender’s firmware up to yet, then update the firmware immediately.
Navigate to mywifiext – enter the WiFi extender default login credentials and visit the ‘Firmware’ section. Click on the update button to check if any latest firmware update is available. If available, click on ‘Yes’ button to begin the update process.

Solution #6: Set Up Netgear WiFi Extender Properly

Have you skipped or ignore any step while performing Netgear extender setup? If so, then it could be the reason behind the Netgear extender is not working. Reset your Netgear extender, and then re-configure it. Press the reset button present at the side or back panel of the extender. After that, connect your WiFi extender to router. Run any web browser and type 192.168.1.250 in the address bar to visit Netgear extender setup web page.

Conclude

So, these are six easy and quick ways to fix Netgear extender not working issue. If you also know methods to fix Netgear extender not connecting to internet issue, then share with us via comments section.