Drywall Repairs Made Simple

By the time you finish reading this article, you will be able to do basic repairs to damaged drywall. There are a few basic tools that you need to keep around the house, when you have an energetic family and are susceptible to get dings in the walls. This information won't provide enough information to do major repairs to drywall. Major repairs are simple, but you need to learn the basics first.

Listed here is a listing of some tools you'll need. The local big box can supply you with some basic tools. They run in budget range from cost effective to professional quality. They've plastic putty knives for less than a dollar entirely as much as stainless steel that with care, will last a lifetime. If you expect an extremely few repairs, the plastic will suffice. Also, get a carriage bolt, a tiny hammer, a can of drywall joint compound, 150 to 220 grit sandpaper and a paint brush. These basic tools will repair most small dings and dents in drywall drywall repair .

An example of a ding will be where in fact the locking button on a door knob has left the feeling in the wall behind it. This is typical of an instant and easy repair. Consider the damage. Will there be anything protruding above the wall surface? If so, use the carriage bolt to push the protrusion below the wall surface. Utilize the hammer to greatly help persuade the protrusion to go below the outer lining of the wall and across the edges. Next, take the putty knife and some joint compound or because it is commonly called, drywall mud, and fill the hole. Wait until the mud dries, sand lightly and fill the hole again to bring the material to the same level whilst the wall. Sand the outer lining again until the wall is smooth and level. Don't over sand. This may rough up the drywall allowing the paper to fray and requiring more mud to seal the rough surface. There should not be any differences in the surface. Several small applications will last much longer than one large application and offer you better results.

Is everything smooth? Or even, apply even more drywall mud to even the wall surfaces. Sand again. Once the wall is smooth, apply the paint primer. Once the paint primer is dry, apply your regular wall paint. The paint primer would be to seal the wall so the brand new paint doesn't dry too quickly allowing the patch to be visible.