💎Деплоим NFT коллекцию в LayerZero и перегоняем из Arbitrum Nova (гайд для избранных)

В этом гайде я хочу вам рассказать о том, как значительно повысить свои шансы на получение жирного дропа сразу от двух топовых проектов: LayerZero и Arbitrum Nova. Мы проделаем с вами такие активности, о которых никто еще не рассказывал не только в русскоязычном сегменте, но и в англоязычном:
- задеплоим смарт контракт NFT коллекции с использованием протокола LayerZero;
- произведем пермещение NFT между разными сетями с помощью LayerZero, тем самым повысив количество активностей в своем кошельке и увеличив вероятность большого дропа.
НИКТО И НИГДЕ не давал такую инструкцию и не показывал так наглядно процесс деплоя смарт контракта с использованием протокола LayerZero, да при том еще и в сети Arbitrum Nova! LayerZero начал поддерживать сеть Arbitrum Nova совсем недавно, поэтому сейчас лучшее время чтобы проявить активность в этих двух проектах.

Что мы будем делать?

Для того, чтобы не усложнять гайд, будем работать в двух сетях: BNB Chain и Arbitrum Nova.

План действий следующий:

1. Добавляем в кошелек (в моем случае Metamask) сети BNB и Arbitrum Nova;
2. Пополняем наш кошелек в сетях BNB и Arbitrum Nova;
3. Загружаем метаданные для NFT в децентрализованное хранилище файлов IPFS;
4. Деплоим смарт контракт NFT коллекции с использованием библиотеки LayerZero в сети BNB и в сети Arbitrum Nova;
5. Добавляем код смарт контракта в блокчейн эксплореры BNB и Arbitrum Nova.
6. Минтим NFT в сети Arbitrum Nova;
7. Пересылаем NFT из сети Arbitrum Nova в сеть BNB с использованием протокола LayerZero, функции которого встроены в смарт контракт нашей NFT коллекции.
   

Подготовка: добавляем сети BNB и Arbitrum Nova в кошелек

Переходим на сайт ChainList, подключаем кошелек - сверху справа кнопка Connect Wallet.

Вводим в поиске Binance, нажимаем Add to Metamask в блоке Binance Smart Chain Mainnet.

Чтобы уменьшить стоимость наших транзакций в сети BNB, нужно изменить RPC адрес в настройках кошелька. Для этого открываем кошелек, нажимаем на три точки -> Expand view.

Кликаем по круглой иконке -> Settings.

В разделе Settings для сети BNB Chain прописываем New RPC URL.

https://rpc.ankr.com/bsc

Точно так же добавляем сеть Arbitrum Nova на сайте Chainlist. Менять RPC для Arbitrum Nova не нужно.

Подготовка: пополняем кошельки в нужных сетях

Теперь нам нужно поплнить кошелек нативными (главными) монетами в только что добавленных сетях. Для сети BNB Chain - это BNB, можно купить практически на любой бирже (Binance, ByBit, Mexc и т.д.), советую перевести 0.08 BNB для первого аккаунта, чтобы точно хватило денег. Для своих последующих аккаунтов можно использвать меньшие суммы в зависимости от рассчетов, которыу у вас получились.

Для сети Arbitrum Nova нативная монета - это ETH. Arbitrum Nova - это сеть второго уровня (Layer 2) для сети Ethereum, поэтому нам нужно пополнить кошелек монтами ETH, но нужны они нам в сети Arbitrum Nova. На момент написания данного гайда основные биржи не поддерживают сеть Arbitrum Nova, поэтому мы обменяем 0.04 BNB на ETH в сети BNB, например на 1inch.

Чтобы увидеть монеты ETH в сети BNB Chain, нужно добавть адрес смарт контракта в кошельке. Для этого открываем Metamask, нажимаем внизу Import Tokens.

Вставляем адрес контракта:

0x2170ed0880ac9a755fd29b2688956bd959f933f8

Ожидаемся подгрузки информации в двух других графах, кликаем Add custom token.

Затем Import tokens.

Теперь идем в Orbiter.finance - это очень перспективный мост для пересылки активов между разными сетями. Взаимодейстуя с этим приложением, мы также повышаем шаны на получение в будущем потенциального дропа от самого Orbiter.finance, так как у него еще нет своей монеты. Отправляем все свои монеты ETH из сети BNB в сеть Arbitrum Nova.

Загружаем метаданные для NFT в децентрализованное хранилище файлов IPFS

Переходим в сервис Pinata - платформа, которая позволяет взаимодействовать с IPFS хранилищем. Регистрируемся с помощью кнопки Start building или входим в свой аккаунту (кнопка Log in), если вы уже зарегистрированы.

Кликаем Add Files -> File, чтобы загрузить свою картинку для будущей NFT коллекции.

Выбираем нужную картинку (кнопка Select file) -> Upload -> ждем, пока файл загрузится.

Сохраняем CID нашей загруженной картинки, он нам еще понадобится.

Создаем json файл и вставляем туда соедующий код. Чтобы создать json файл у себя на компьютере, достаточно создать новый текстовый файл, вставить внутрь файла код, который я привел ниже (со своими изменениями), сохранить и поменять расширение файла с ".txt" на ".json". Если у вас не отображаются расширения файлов, не пытайтесь добавить ".json" в название файла, посмотрите в Google, как включить отображение расширения файлов для вашей операционной системы.

Вы можете изменить 3 значения:

1. "At Least You Tried" - имя NFT коллекции;
2. "1000 NFTs travelling across different chains" - описание NFT коллекции;
3. "ipfs://QmZNw7zqr74QwACtF771CGiSfCk6yvVtLGjNTWP9ZfXZFX" - здесь вместо QmZNw7zqr74QwACtF771CGiSfCk6yvVtLGjNTWP9ZfXZFX нужно вставить CID своей картинки, которую вы загрузили на Pinata.

{
    "name": "At Least You Tried",
    "description": "1000 NFTs travelling across different chains",
    "image": "ipfs://QmZNw7zqr74QwACtF771CGiSfCk6yvVtLGjNTWP9ZfXZFX",
    "attributes": []
}

Теперь загружаем этот json файл на Pinata точно так же, как загружали картинку.

Соххраняем CID только что загруженного файла, он нам скоро понадобится.

Деплоим смарт контракт NFT коллекции в сети BNB и в сети Arbitrum Nova

Теперь переходим к главной части этого гайда - деплой смарт контракта и взаимодействие с ним в сетях BNB и Arbitrum Nova. Открываем сайт Remix - это онлайн приложение для написания и деплоя смарт контрактов.

Нажимам правой кнопкой мыши на папку contracts -> New File

Создаем файл с названием LayerZeroNFT.sol. Вставляем в редактор следующий код. Это специальный уникальный код смарт контракта NFT коллекции с библиотекой от LayerZero. Я его подготовил для этого гайда, использовав лучшие подходы для написания смарт контрактов с использованием протокола LayerZero и для нашего с вами удобства сделал один большой текстовый файл с кодом, который мы сможем с легкостью использовать для деплоя в любых EVM совместимых сетях, а затем (это очень важно!) с такой же легкостью сможем верифицировать код этого смарт контракта в блокчейн эксплорерах, чтобы другие пользователи могли взаимодествовать с функциями нашей NFT коллекции, например, с функцией минта новых NFT.

//SPDX-License-Identifier: MIT

// File: @openzeppelin/contracts/utils/math/SignedMath.sol


// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// File: @openzeppelin/contracts/utils/math/Math.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// File: @openzeppelin/contracts/utils/Strings.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;



/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// File: @openzeppelin/contracts/utils/Address.sol


// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol


// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// File: @openzeppelin/contracts/security/ReentrancyGuard.sol


// OpenZeppelin Contracts (last updated v4.9.0) (security/ReentrancyGuard.sol)

pragma solidity ^0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be _NOT_ENTERED
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == _ENTERED;
    }
}

// File: contracts/lz-contracts/util/ExcessivelySafeCall.sol


pragma solidity >=0.7.6;

library ExcessivelySafeCall {
    uint256 constant LOW_28_MASK =
    0x00000000ffffffffffffffffffffffffffffffffffffffffffffffffffffffff;

    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := call(
            _gas, // gas
            _target, // recipient
            0, // ether value
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }

    /// @notice Use when you _really_ really _really_ don't trust the called
    /// contract. This prevents the called contract from causing reversion of
    /// the caller in as many ways as we can.
    /// @dev The main difference between this and a solidity low-level call is
    /// that we limit the number of bytes that the callee can cause to be
    /// copied to caller memory. This prevents stupid things like malicious
    /// contracts returning 10,000,000 bytes causing a local OOG when copying
    /// to memory.
    /// @param _target The address to call
    /// @param _gas The amount of gas to forward to the remote contract
    /// @param _maxCopy The maximum number of bytes of returndata to copy
    /// to memory.
    /// @param _calldata The data to send to the remote contract
    /// @return success and returndata, as `.call()`. Returndata is capped to
    /// `_maxCopy` bytes.
    function excessivelySafeStaticCall(
        address _target,
        uint256 _gas,
        uint16 _maxCopy,
        bytes memory _calldata
    ) internal view returns (bool, bytes memory) {
        // set up for assembly call
        uint256 _toCopy;
        bool _success;
        bytes memory _returnData = new bytes(_maxCopy);
        // dispatch message to recipient
        // by assembly calling "handle" function
        // we call via assembly to avoid memcopying a very large returndata
        // returned by a malicious contract
        assembly {
            _success := staticcall(
            _gas, // gas
            _target, // recipient
            add(_calldata, 0x20), // inloc
            mload(_calldata), // inlen
            0, // outloc
            0 // outlen
            )
        // limit our copy to 256 bytes
            _toCopy := returndatasize()
            if gt(_toCopy, _maxCopy) {
                _toCopy := _maxCopy
            }
        // Store the length of the copied bytes
            mstore(_returnData, _toCopy)
        // copy the bytes from returndata[0:_toCopy]
            returndatacopy(add(_returnData, 0x20), 0, _toCopy)
        }
        return (_success, _returnData);
    }

    /**
     * @notice Swaps function selectors in encoded contract calls
     * @dev Allows reuse of encoded calldata for functions with identical
     * argument types but different names. It simply swaps out the first 4 bytes
     * for the new selector. This function modifies memory in place, and should
     * only be used with caution.
     * @param _newSelector The new 4-byte selector
     * @param _buf The encoded contract args
     */
    function swapSelector(bytes4 _newSelector, bytes memory _buf)
    internal
    pure
    {
        require(_buf.length >= 4);
        uint256 _mask = LOW_28_MASK;
        assembly {
        // load the first word of
            let _word := mload(add(_buf, 0x20))
        // mask out the top 4 bytes
        // /x
            _word := and(_word, _mask)
            _word := or(_newSelector, _word)
            mstore(add(_buf, 0x20), _word)
        }
    }
}

// File: contracts/lz-contracts/util/BytesLib.sol


/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;


library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
    internal
    pure
    returns (bytes memory)
    {
        bytes memory tempBytes;

        assembly {
        // Get a location of some free memory and store it in tempBytes as
        // Solidity does for memory variables.
            tempBytes := mload(0x40)

        // Store the length of the first bytes array at the beginning of
        // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

        // Maintain a memory counter for the current write location in the
        // temp bytes array by adding the 32 bytes for the array length to
        // the starting location.
            let mc := add(tempBytes, 0x20)
        // Stop copying when the memory counter reaches the length of the
        // first bytes array.
            let end := add(mc, length)

            for {
            // Initialize a copy counter to the start of the _preBytes data,
            // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
            // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
            // Write the _preBytes data into the tempBytes memory 32 bytes
            // at a time.
                mstore(mc, mload(cc))
            }

        // Add the length of _postBytes to the current length of tempBytes
        // and store it as the new length in the first 32 bytes of the
        // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

        // Move the memory counter back from a multiple of 0x20 to the
        // actual end of the _preBytes data.
            mc := end
        // Stop copying when the memory counter reaches the new combined
        // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

        // Update the free-memory pointer by padding our last write location
        // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
        // next 32 byte block, then round down to the nearest multiple of
        // 32. If the sum of the length of the two arrays is zero then add
        // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
            add(add(end, iszero(add(length, mload(_preBytes)))), 31),
            not(31) // Round down to the nearest 32 bytes.
            ))
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
        // Read the first 32 bytes of _preBytes storage, which is the length
        // of the array. (We don't need to use the offset into the slot
        // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
        // Arrays of 31 bytes or less have an even value in their slot,
        // while longer arrays have an odd value. The actual length is
        // the slot divided by two for odd values, and the lowest order
        // byte divided by two for even values.
        // If the slot is even, bitwise and the slot with 255 and divide by
        // two to get the length. If the slot is odd, bitwise and the slot
        // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
        // slength can contain both the length and contents of the array
        // if length < 32 bytes so let's prepare for that
        // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
            // Since the new array still fits in the slot, we just need to
            // update the contents of the slot.
            // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                _preBytes.slot,
                // all the modifications to the slot are inside this
                // next block
                add(
                // we can just add to the slot contents because the
                // bytes we want to change are the LSBs
                fslot,
                add(
                mul(
                div(
                // load the bytes from memory
                mload(add(_postBytes, 0x20)),
                // zero all bytes to the right
                exp(0x100, sub(32, mlength))
                ),
                // and now shift left the number of bytes to
                // leave space for the length in the slot
                exp(0x100, sub(32, newlength))
                ),
                // increase length by the double of the memory
                // bytes length
                mul(mlength, 2)
                )
                )
                )
            }
            case 1 {
            // The stored value fits in the slot, but the combined value
            // will exceed it.
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

            // The contents of the _postBytes array start 32 bytes into
            // the structure. Our first read should obtain the `submod`
            // bytes that can fit into the unused space in the last word
            // of the stored array. To get this, we read 32 bytes starting
            // from `submod`, so the data we read overlaps with the array
            // contents by `submod` bytes. Masking the lowest-order
            // `submod` bytes allows us to add that value directly to the
            // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                sc,
                add(
                and(
                fslot,
                0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                ),
                and(mload(mc), mask)
                )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
            // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
            // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

            // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

            // Copy over the first `submod` bytes of the new data as in
            // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
    internal
    pure
    returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
                tempBytes := mload(0x40)

            // The first word of the slice result is potentially a partial
            // word read from the original array. To read it, we calculate
            // the length of that partial word and start copying that many
            // bytes into the array. The first word we copy will start with
            // data we don't care about, but the last `lengthmod` bytes will
            // land at the beginning of the contents of the new array. When
            // we're done copying, we overwrite the full first word with
            // the actual length of the slice.
                let lengthmod := and(_length, 31)

            // The multiplication in the next line is necessary
            // because when slicing multiples of 32 bytes (lengthmod == 0)
            // the following copy loop was copying the origin's length
            // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                // The multiplication in the next line has the same exact purpose
                // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

            //update free-memory pointer
            //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
            //zero out the 32 bytes slice we are about to return
            //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

        // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
            // cb is a circuit breaker in the for loop since there's
            //  no said feature for inline assembly loops
            // cb = 1 - don't breaker
            // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                    // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
    internal
    view
    returns (bool)
    {
        bool success = true;

        assembly {
        // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
        // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

        // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                    // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                        // unsuccess:
                            success := 0
                        }
                    }
                    default {
                    // cb is a circuit breaker in the for loop since there's
                    //  no said feature for inline assembly loops
                    // cb = 1 - don't breaker
                    // cb = 0 - break
                        let cb := 1

                    // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                    // the next line is the loop condition:
                    // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                            // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
            // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

// File: contracts/lz-contracts/interfaces/ILayerZeroUserApplicationConfig.sol



pragma solidity >=0.5.0;

interface ILayerZeroUserApplicationConfig {
    // @notice set the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _configType - type of configuration. every messaging library has its own convention.
    // @param _config - configuration in the bytes. can encode arbitrary content.
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external;

    // @notice set the send() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setSendVersion(uint16 _version) external;

    // @notice set the lzReceive() LayerZero messaging library version to _version
    // @param _version - new messaging library version
    function setReceiveVersion(uint16 _version) external;

    // @notice Only when the UA needs to resume the message flow in blocking mode and clear the stored payload
    // @param _srcChainId - the chainId of the source chain
    // @param _srcAddress - the contract address of the source contract at the source chain
    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external;
}

// File: contracts/lz-contracts/interfaces/ILayerZeroEndpoint.sol



pragma solidity >=0.5.0;


interface ILayerZeroEndpoint is ILayerZeroUserApplicationConfig {
    // @notice send a LayerZero message to the specified address at a LayerZero endpoint.
    // @param _dstChainId - the destination chain identifier
    // @param _destination - the address on destination chain (in bytes). address length/format may vary by chains
    // @param _payload - a custom bytes payload to send to the destination contract
    // @param _refundAddress - if the source transaction is cheaper than the amount of value passed, refund the additional amount to this address
    // @param _zroPaymentAddress - the address of the ZRO token holder who would pay for the transaction
    // @param _adapterParams - parameters for custom functionality. e.g. receive airdropped native gas from the relayer on destination
    function send(uint16 _dstChainId, bytes calldata _destination, bytes calldata _payload, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;

    // @notice used by the messaging library to publish verified payload
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source contract (as bytes) at the source chain
    // @param _dstAddress - the address on destination chain
    // @param _nonce - the unbound message ordering nonce
    // @param _gasLimit - the gas limit for external contract execution
    // @param _payload - verified payload to send to the destination contract
    function receivePayload(uint16 _srcChainId, bytes calldata _srcAddress, address _dstAddress, uint64 _nonce, uint _gasLimit, bytes calldata _payload) external;

    // @notice get the inboundNonce of a lzApp from a source chain which could be EVM or non-EVM chain
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function getInboundNonce(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (uint64);

    // @notice get the outboundNonce from this source chain which, consequently, is always an EVM
    // @param _srcAddress - the source chain contract address
    function getOutboundNonce(uint16 _dstChainId, address _srcAddress) external view returns (uint64);

    // @notice gets a quote in source native gas, for the amount that send() requires to pay for message delivery
    // @param _dstChainId - the destination chain identifier
    // @param _userApplication - the user app address on this EVM chain
    // @param _payload - the custom message to send over LayerZero
    // @param _payInZRO - if false, user app pays the protocol fee in native token
    // @param _adapterParam - parameters for the adapter service, e.g. send some dust native token to dstChain
    function estimateFees(uint16 _dstChainId, address _userApplication, bytes calldata _payload, bool _payInZRO, bytes calldata _adapterParam) external view returns (uint nativeFee, uint zroFee);

    // @notice get this Endpoint's immutable source identifier
    function getChainId() external view returns (uint16);

    // @notice the interface to retry failed message on this Endpoint destination
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    // @param _payload - the payload to be retried
    function retryPayload(uint16 _srcChainId, bytes calldata _srcAddress, bytes calldata _payload) external;

    // @notice query if any STORED payload (message blocking) at the endpoint.
    // @param _srcChainId - the source chain identifier
    // @param _srcAddress - the source chain contract address
    function hasStoredPayload(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool);

    // @notice query if the _libraryAddress is valid for sending msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getSendLibraryAddress(address _userApplication) external view returns (address);

    // @notice query if the _libraryAddress is valid for receiving msgs.
    // @param _userApplication - the user app address on this EVM chain
    function getReceiveLibraryAddress(address _userApplication) external view returns (address);

    // @notice query if the non-reentrancy guard for send() is on
    // @return true if the guard is on. false otherwise
    function isSendingPayload() external view returns (bool);

    // @notice query if the non-reentrancy guard for receive() is on
    // @return true if the guard is on. false otherwise
    function isReceivingPayload() external view returns (bool);

    // @notice get the configuration of the LayerZero messaging library of the specified version
    // @param _version - messaging library version
    // @param _chainId - the chainId for the pending config change
    // @param _userApplication - the contract address of the user application
    // @param _configType - type of configuration. every messaging library has its own convention.
    function getConfig(uint16 _version, uint16 _chainId, address _userApplication, uint _configType) external view returns (bytes memory);

    // @notice get the send() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getSendVersion(address _userApplication) external view returns (uint16);

    // @notice get the lzReceive() LayerZero messaging library version
    // @param _userApplication - the contract address of the user application
    function getReceiveVersion(address _userApplication) external view returns (uint16);
}

// File: contracts/lz-contracts/interfaces/ILayerZeroReceiver.sol



pragma solidity >=0.5.0;

interface ILayerZeroReceiver {
    // @notice LayerZero endpoint will invoke this function to deliver the message on the destination
    // @param _srcChainId - the source endpoint identifier
    // @param _srcAddress - the source sending contract address from the source chain
    // @param _nonce - the ordered message nonce
    // @param _payload - the signed payload is the UA bytes has encoded to be sent
    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) external;
}

// File: @openzeppelin/contracts/utils/Context.sol


// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol


// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;


/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// File: contracts/lz-contracts/lzApp/LzApp.sol



pragma solidity ^0.8.0;






/*
 * a generic LzReceiver implementation
 */
abstract contract LzApp is Ownable, ILayerZeroReceiver, ILayerZeroUserApplicationConfig {
    using BytesLib for bytes;

    // ua can not send payload larger than this by default, but it can be changed by the ua owner
    uint constant public DEFAULT_PAYLOAD_SIZE_LIMIT = 10000;

    ILayerZeroEndpoint public immutable lzEndpoint;
    mapping(uint16 => bytes) public trustedRemoteLookup;
    mapping(uint16 => mapping(uint16 => uint)) public minDstGasLookup;
    mapping(uint16 => uint) public payloadSizeLimitLookup;
    address public precrime;

    event SetPrecrime(address precrime);
    event SetTrustedRemote(uint16 _remoteChainId, bytes _path);
    event SetTrustedRemoteAddress(uint16 _remoteChainId, bytes _remoteAddress);
    event SetMinDstGas(uint16 _dstChainId, uint16 _type, uint _minDstGas);

    constructor(address _endpoint) {
        lzEndpoint = ILayerZeroEndpoint(_endpoint);
    }

    function lzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual override {
        // lzReceive must be called by the endpoint for security
        require(_msgSender() == address(lzEndpoint), "LzApp: invalid endpoint caller");

        bytes memory trustedRemote = trustedRemoteLookup[_srcChainId];
        // if will still block the message pathway from (srcChainId, srcAddress). should not receive message from untrusted remote.
        require(_srcAddress.length == trustedRemote.length && trustedRemote.length > 0 && keccak256(_srcAddress) == keccak256(trustedRemote), "LzApp: invalid source sending contract");

        _blockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }

    // abstract function - the default behaviour of LayerZero is blocking. See: NonblockingLzApp if you dont need to enforce ordered messaging
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;

    function _lzSend(uint16 _dstChainId, bytes memory _payload, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams, uint _nativeFee) internal virtual {
        bytes memory trustedRemote = trustedRemoteLookup[_dstChainId];
        require(trustedRemote.length != 0, "LzApp: destination chain is not a trusted source");
        _checkPayloadSize(_dstChainId, _payload.length);
        lzEndpoint.send{value: _nativeFee}(_dstChainId, trustedRemote, _payload, _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function _checkGasLimit(uint16 _dstChainId, uint16 _type, bytes memory _adapterParams, uint _extraGas) internal view virtual {
        uint providedGasLimit = _getGasLimit(_adapterParams);
        uint minGasLimit = minDstGasLookup[_dstChainId][_type] + _extraGas;
        require(minGasLimit > 0, "LzApp: minGasLimit not set");
        require(providedGasLimit >= minGasLimit, "LzApp: gas limit is too low");
    }

    function _getGasLimit(bytes memory _adapterParams) internal pure virtual returns (uint gasLimit) {
        require(_adapterParams.length >= 34, "LzApp: invalid adapterParams");
        assembly {
            gasLimit := mload(add(_adapterParams, 34))
        }
    }

    function _checkPayloadSize(uint16 _dstChainId, uint _payloadSize) internal view virtual {
        uint payloadSizeLimit = payloadSizeLimitLookup[_dstChainId];
        if (payloadSizeLimit == 0) { // use default if not set
            payloadSizeLimit = DEFAULT_PAYLOAD_SIZE_LIMIT;
        }
        require(_payloadSize <= payloadSizeLimit, "LzApp: payload size is too large");
    }

    //---------------------------UserApplication config----------------------------------------
    function getConfig(uint16 _version, uint16 _chainId, address, uint _configType) external view returns (bytes memory) {
        return lzEndpoint.getConfig(_version, _chainId, address(this), _configType);
    }

    // generic config for LayerZero user Application
    function setConfig(uint16 _version, uint16 _chainId, uint _configType, bytes calldata _config) external override onlyOwner {
        lzEndpoint.setConfig(_version, _chainId, _configType, _config);
    }

    function setSendVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setSendVersion(_version);
    }

    function setReceiveVersion(uint16 _version) external override onlyOwner {
        lzEndpoint.setReceiveVersion(_version);
    }

    function forceResumeReceive(uint16 _srcChainId, bytes calldata _srcAddress) external override onlyOwner {
        lzEndpoint.forceResumeReceive(_srcChainId, _srcAddress);
    }

    // _path = abi.encodePacked(remoteAddress, localAddress)
    // this function set the trusted path for the cross-chain communication
    function setTrustedRemote(uint16 _remoteChainId, bytes calldata _path) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = _path;
        emit SetTrustedRemote(_remoteChainId, _path);
    }

    function setTrustedRemoteAddress(uint16 _remoteChainId, bytes calldata _remoteAddress) external onlyOwner {
        trustedRemoteLookup[_remoteChainId] = abi.encodePacked(_remoteAddress, address(this));
        emit SetTrustedRemoteAddress(_remoteChainId, _remoteAddress);
    }

    function getTrustedRemoteAddress(uint16 _remoteChainId) external view returns (bytes memory) {
        bytes memory path = trustedRemoteLookup[_remoteChainId];
        require(path.length != 0, "LzApp: no trusted path record");
        return path.slice(0, path.length - 20); // the last 20 bytes should be address(this)
    }

    function setPrecrime(address _precrime) external onlyOwner {
        precrime = _precrime;
        emit SetPrecrime(_precrime);
    }

    function setMinDstGas(uint16 _dstChainId, uint16 _packetType, uint _minGas) external onlyOwner {
        require(_minGas > 0, "LzApp: invalid minGas");
        minDstGasLookup[_dstChainId][_packetType] = _minGas;
        emit SetMinDstGas(_dstChainId, _packetType, _minGas);
    }

    // if the size is 0, it means default size limit
    function setPayloadSizeLimit(uint16 _dstChainId, uint _size) external onlyOwner {
        payloadSizeLimitLookup[_dstChainId] = _size;
    }

    //--------------------------- VIEW FUNCTION ----------------------------------------
    function isTrustedRemote(uint16 _srcChainId, bytes calldata _srcAddress) external view returns (bool) {
        bytes memory trustedSource = trustedRemoteLookup[_srcChainId];
        return keccak256(trustedSource) == keccak256(_srcAddress);
    }
}

// File: contracts/lz-contracts/lzApp/NonblockingLzApp.sol



pragma solidity ^0.8.0;



/*
 * the default LayerZero messaging behaviour is blocking, i.e. any failed message will block the channel
 * this abstract class try-catch all fail messages and store locally for future retry. hence, non-blocking
 * NOTE: if the srcAddress is not configured properly, it will still block the message pathway from (srcChainId, srcAddress)
 */
abstract contract NonblockingLzApp is LzApp {
    using ExcessivelySafeCall for address;

    constructor(address _endpoint) LzApp(_endpoint) {}

    mapping(uint16 => mapping(bytes => mapping(uint64 => bytes32))) public failedMessages;

    event MessageFailed(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes _payload, bytes _reason);
    event RetryMessageSuccess(uint16 _srcChainId, bytes _srcAddress, uint64 _nonce, bytes32 _payloadHash);

    // overriding the virtual function in LzReceiver
    function _blockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual override {
        (bool success, bytes memory reason) = address(this).excessivelySafeCall(gasleft(), 150, abi.encodeWithSelector(this.nonblockingLzReceive.selector, _srcChainId, _srcAddress, _nonce, _payload));
        // try-catch all errors/exceptions
        if (!success) {
            _storeFailedMessage(_srcChainId, _srcAddress, _nonce, _payload, reason);
        }
    }

    function _storeFailedMessage(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload, bytes memory _reason) internal virtual {
        failedMessages[_srcChainId][_srcAddress][_nonce] = keccak256(_payload);
        emit MessageFailed(_srcChainId, _srcAddress, _nonce, _payload, _reason);
    }

    function nonblockingLzReceive(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public virtual {
        // only internal transaction
        require(_msgSender() == address(this), "NonblockingLzApp: caller must be LzApp");
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
    }

    //@notice override this function
    function _nonblockingLzReceive(uint16 _srcChainId, bytes memory _srcAddress, uint64 _nonce, bytes memory _payload) internal virtual;

    function retryMessage(uint16 _srcChainId, bytes calldata _srcAddress, uint64 _nonce, bytes calldata _payload) public payable virtual {
        // assert there is message to retry
        bytes32 payloadHash = failedMessages[_srcChainId][_srcAddress][_nonce];
        require(payloadHash != bytes32(0), "NonblockingLzApp: no stored message");
        require(keccak256(_payload) == payloadHash, "NonblockingLzApp: invalid payload");
        // clear the stored message
        failedMessages[_srcChainId][_srcAddress][_nonce] = bytes32(0);
        // execute the message. revert if it fails again
        _nonblockingLzReceive(_srcChainId, _srcAddress, _nonce, _payload);
        emit RetryMessageSuccess(_srcChainId, _srcAddress, _nonce, payloadHash);
    }
}

// File: @openzeppelin/contracts/utils/introspection/IERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/utils/introspection/ERC165.sol


// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;


/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721.sol


// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;


/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}

// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol


// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;


/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}

// File: @openzeppelin/contracts/token/ERC721/ERC721.sol


// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;








/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {}

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * WARNING: Anyone calling this MUST ensure that the balances remain consistent with the ownership. The invariant
     * being that for any address `a` the value returned by `balanceOf(a)` must be equal to the number of tokens such
     * that `ownerOf(tokenId)` is `a`.
     */
    // solhint-disable-next-line func-name-mixedcase
    function __unsafe_increaseBalance(address account, uint256 amount) internal {
        _balances[account] += amount;
    }
}

// File: contracts/lz-contracts/token/onft/IONFT721Core.sol



pragma solidity >=0.5.0;


/**
 * @dev Interface of the ONFT Core standard
 */
interface IONFT721Core is IERC165 {
    /**
     * @dev Emitted when `_tokenIds[]` are moved from the `_sender` to (`_dstChainId`, `_toAddress`)
     * `_nonce` is the outbound nonce from
     */
    event SendToChain(uint16 indexed _dstChainId, address indexed _from, bytes indexed _toAddress, uint[] _tokenIds);
    event ReceiveFromChain(uint16 indexed _srcChainId, bytes indexed _srcAddress, address indexed _toAddress, uint[] _tokenIds);
    event SetMinGasToTransferAndStore(uint256 _minGasToTransferAndStore);
    event SetDstChainIdToTransferGas(uint16 _dstChainId, uint256 _dstChainIdToTransferGas);
    event SetDstChainIdToBatchLimit(uint16 _dstChainId, uint256 _dstChainIdToBatchLimit);

    /**
     * @dev Emitted when `_payload` was received from lz, but not enough gas to deliver all tokenIds
     */
    event CreditStored(bytes32 _hashedPayload, bytes _payload);
    /**
     * @dev Emitted when `_hashedPayload` has been completely delivered
     */
    event CreditCleared(bytes32 _hashedPayload);

    /**
     * @dev send token `_tokenId` to (`_dstChainId`, `_toAddress`) from `_from`
     * `_toAddress` can be any size depending on the `dstChainId`.
     * `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
     * `_adapterParams` is a flexible bytes array to indicate messaging adapter services
     */
    function sendFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint _tokenId, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;
    /**
     * @dev send tokens `_tokenIds[]` to (`_dstChainId`, `_toAddress`) from `_from`
     * `_toAddress` can be any size depending on the `dstChainId`.
     * `_zroPaymentAddress` set to address(0x0) if not paying in ZRO (LayerZero Token)
     * `_adapterParams` is a flexible bytes array to indicate messaging adapter services
     */
    function sendBatchFrom(address _from, uint16 _dstChainId, bytes calldata _toAddress, uint[] calldata _tokenIds, address payable _refundAddress, address _zroPaymentAddress, bytes calldata _adapterParams) external payable;

    /**
     * @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
     * _dstChainId - L0 defined chain id to send tokens too
     * _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
     * _tokenId - token Id to transfer
     * _useZro - indicates to use zro to pay L0 fees
     * _adapterParams - flexible bytes array to indicate messaging adapter services in L0
     */
    function estimateSendFee(uint16 _dstChainId, bytes calldata _toAddress, uint _tokenId, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
    /**
     * @dev estimate send token `_tokenId` to (`_dstChainId`, `_toAddress`)
     * _dstChainId - L0 defined chain id to send tokens too
     * _toAddress - dynamic bytes array which contains the address to whom you are sending tokens to on the dstChain
     * _tokenIds[] - token Ids to transfer
     * _useZro - indicates to use zro to pay L0 fees
     * _adapterParams - flexible bytes array to indicate messaging adapter services in L0
     */
    function estimateSendBatchFee(uint16 _dstChainId, bytes calldata _toAddress, uint[] calldata _tokenIds, bool _useZro, bytes calldata _adapterParams) external view returns (uint nativeFee, uint zroFee);
}

// File: contracts/lz-contracts/token/onft/ONFT721Core.sol



pragma solidity ^0.8.0;





abstract contract ONFT721Core is NonblockingLzApp, ERC165, ReentrancyGuard, IONFT721Core {
    uint16 public constant FUNCTION_TYPE_SEND = 1;

    struct StoredCredit {
        uint16 srcChainId;
        address toAddress;
        uint256 index; // which index of the tokenIds remain
        bool creditsRemain;
    }

    uint256 public minGasToTransferAndStore; // min amount of gas required to transfer, and also store the payload
    mapping(uint16 => uint256) public dstChainIdToBatchLimit;
    mapping(uint16 => uint256) public dstChainIdToTransferGas; // per transfer amount of gas required to mint/transfer on the dst
    mapping(bytes32 => StoredCredit) public storedCredits;

    constructor(uint256 _minGasToTransferAndStore, address _lzEndpoint) NonblockingLzApp(_lzEndpoint) {
        require(_minGasToTransferAndStore > 0, "minGasToTransferAndStore must be > 0");
        minGasToTransferAndStore = _minGasToTransferAndStore;
    }

    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId == type(IONFT721Core).interfaceId || super.supportsInterface(interfaceId);
    }

    function estimateSendFee(uint16 _dstChainId, bytes memory _toAddress, uint _tokenId, bool _useZro, bytes memory _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        return estimateSendBatchFee(_dstChainId, _toAddress, _toSingletonArray(_tokenId), _useZro, _adapterParams);
    }

    function estimateSendBatchFee(uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, bool _useZro, bytes memory _adapterParams) public view virtual override returns (uint nativeFee, uint zroFee) {
        bytes memory payload = abi.encode(_toAddress, _tokenIds);
        return lzEndpoint.estimateFees(_dstChainId, address(this), payload, _useZro, _adapterParams);
    }

    function sendFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _tokenId, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) public payable virtual override {
        _send(_from, _dstChainId, _toAddress, _toSingletonArray(_tokenId), _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function sendBatchFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) public payable virtual override {
        _send(_from, _dstChainId, _toAddress, _tokenIds, _refundAddress, _zroPaymentAddress, _adapterParams);
    }

    function _send(address _from, uint16 _dstChainId, bytes memory _toAddress, uint[] memory _tokenIds, address payable _refundAddress, address _zroPaymentAddress, bytes memory _adapterParams) internal virtual {
        // allow 1 by default
        require(_tokenIds.length > 0, "tokenIds[] is empty");
        require(_tokenIds.length == 1 || _tokenIds.length <= dstChainIdToBatchLimit[_dstChainId], "batch size exceeds dst batch limit");

        for (uint i = 0; i < _tokenIds.length; i++) {
            _debitFrom(_from, _dstChainId, _toAddress, _tokenIds[i]);
        }

        bytes memory payload = abi.encode(_toAddress, _tokenIds);

        _checkGasLimit(_dstChainId, FUNCTION_TYPE_SEND, _adapterParams, dstChainIdToTransferGas[_dstChainId] * _tokenIds.length);
        _lzSend(_dstChainId, payload, _refundAddress, _zroPaymentAddress, _adapterParams, msg.value);
        emit SendToChain(_dstChainId, _from, _toAddress, _tokenIds);
    }

    function _nonblockingLzReceive(
        uint16 _srcChainId,
        bytes memory _srcAddress,
        uint64, /*_nonce*/
        bytes memory _payload
    ) internal virtual override {
        // decode and load the toAddress
        (bytes memory toAddressBytes, uint[] memory tokenIds) = abi.decode(_payload, (bytes, uint[]));

        address toAddress;
        assembly {
            toAddress := mload(add(toAddressBytes, 20))
        }

        uint nextIndex = _creditTill(_srcChainId, toAddress, 0, tokenIds);
        if (nextIndex < tokenIds.length) {
            // not enough gas to complete transfers, store to be cleared in another tx
            bytes32 hashedPayload = keccak256(_payload);
            storedCredits[hashedPayload] = StoredCredit(_srcChainId, toAddress, nextIndex, true);
            emit CreditStored(hashedPayload, _payload);
        }

        emit ReceiveFromChain(_srcChainId, _srcAddress, toAddress, tokenIds);
    }

    // Public function for anyone to clear and deliver the remaining batch sent tokenIds
    function clearCredits(bytes memory _payload) external virtual nonReentrant {
        bytes32 hashedPayload = keccak256(_payload);
        require(storedCredits[hashedPayload].creditsRemain, "no credits stored");

        (, uint[] memory tokenIds) = abi.decode(_payload, (bytes, uint[]));

        uint nextIndex = _creditTill(storedCredits[hashedPayload].srcChainId, storedCredits[hashedPayload].toAddress, storedCredits[hashedPayload].index, tokenIds);
        require(nextIndex > storedCredits[hashedPayload].index, "not enough gas to process credit transfer");

        if (nextIndex == tokenIds.length) {
            // cleared the credits, delete the element
            delete storedCredits[hashedPayload];
            emit CreditCleared(hashedPayload);
        } else {
            // store the next index to mint
            storedCredits[hashedPayload] = StoredCredit(storedCredits[hashedPayload].srcChainId, storedCredits[hashedPayload].toAddress, nextIndex, true);
        }
    }

    // When a srcChain has the ability to transfer more chainIds in a single tx than the dst can do.
    // Needs the ability to iterate and stop if the minGasToTransferAndStore is not met
    function _creditTill(uint16 _srcChainId, address _toAddress, uint _startIndex, uint[] memory _tokenIds) internal returns (uint256){
        uint i = _startIndex;
        while (i < _tokenIds.length) {
            // if not enough gas to process, store this index for next loop
            if (gasleft() < minGasToTransferAndStore) break;

            _creditTo(_srcChainId, _toAddress, _tokenIds[i]);
            i++;
        }

        // indicates the next index to send of tokenIds,
        // if i == tokenIds.length, we are finished
        return i;
    }

    function setMinGasToTransferAndStore(uint256 _minGasToTransferAndStore) external onlyOwner {
        require(_minGasToTransferAndStore > 0, "minGasToTransferAndStore must be > 0");
        minGasToTransferAndStore = _minGasToTransferAndStore;
        emit SetMinGasToTransferAndStore(_minGasToTransferAndStore);
    }

    // ensures enough gas in adapter params to handle batch transfer gas amounts on the dst
    function setDstChainIdToTransferGas(uint16 _dstChainId, uint256 _dstChainIdToTransferGas) external onlyOwner {
        require(_dstChainIdToTransferGas > 0, "dstChainIdToTransferGas must be > 0");
        dstChainIdToTransferGas[_dstChainId] = _dstChainIdToTransferGas;
        emit SetDstChainIdToTransferGas(_dstChainId, _dstChainIdToTransferGas);
    }

    // limit on src the amount of tokens to batch send
    function setDstChainIdToBatchLimit(uint16 _dstChainId, uint256 _dstChainIdToBatchLimit) external onlyOwner {
        require(_dstChainIdToBatchLimit > 0, "dstChainIdToBatchLimit must be > 0");
        dstChainIdToBatchLimit[_dstChainId] = _dstChainIdToBatchLimit;
        emit SetDstChainIdToBatchLimit(_dstChainId, _dstChainIdToBatchLimit);
    }

    function _debitFrom(address _from, uint16 _dstChainId, bytes memory _toAddress, uint _tokenId) internal virtual;

    function _creditTo(uint16 _srcChainId, address _toAddress, uint _tokenId) internal virtual;

    function _toSingletonArray(uint element) internal pure returns (uint[] memory) {
        uint[] memory array = new uint[](1);
        array[0] = element;
        return array;
    }
}

// File: contracts/lz-contracts/token/onft/IONFT721.sol



pragma solidity >=0.5.0;



/**
 * @dev Interface of the ONFT standard
 */
interface IONFT721 is IONFT721Core, IERC721 {

}

// File: contracts/lz-contracts/token/onft/ONFT721.sol



pragma solidity ^0.8.0;




// NOTE: this ONFT contract has no public minting logic.
// must implement your own minting logic in child classes
contract ONFT721 is ONFT721Core, ERC721, IONFT721 {
    constructor(string memory _name, string memory _symbol, uint256 _minGasToTransfer, address _lzEndpoint) ERC721(_name, _symbol) ONFT721Core(_minGasToTransfer, _lzEndpoint) {}

    function supportsInterface(bytes4 interfaceId) public view virtual override(ONFT721Core, ERC721, IERC165) returns (bool) {
        return interfaceId == type(IONFT721).interfaceId || super.supportsInterface(interfaceId);
    }

    function _debitFrom(address _from, uint16, bytes memory, uint _tokenId) internal virtual override {
        require(_isApprovedOrOwner(_msgSender(), _tokenId), "ONFT721: send caller is not owner nor approved");
        require(ERC721.ownerOf(_tokenId) == _from, "ONFT721: send from incorrect owner");
        _transfer(_from, address(this), _tokenId);
    }

    function _creditTo(uint16, address _toAddress, uint _tokenId) internal virtual override {
        require(!_exists(_tokenId) || (_exists(_tokenId) && ERC721.ownerOf(_tokenId) == address(this)));
        if (!_exists(_tokenId)) {
            _safeMint(_toAddress, _tokenId);
        } else {
            _transfer(address(this), _toAddress, _tokenId);
        }
    }
}

// File: contracts/lz-contracts/token/onft/extension/UniversalONFT721.sol



pragma solidity ^0.8.0;


/// @title Interface of the UniversalONFT standard
contract UniversalONFT721 is ONFT721 {
    uint public nextMintId;
    uint public maxMintId;

    /// @notice Constructor for the UniversalONFT
    /// @param _name the name of the token
    /// @param _symbol the token symbol
    /// @param _layerZeroEndpoint handles message transmission across chains
    /// @param _startMintId the starting mint number on this chain
    /// @param _endMintId the max number of mints on this chain
    constructor(string memory _name, string memory _symbol, uint256 _minGasToTransfer, address _layerZeroEndpoint, uint _startMintId, uint _endMintId) ONFT721(_name, _symbol, _minGasToTransfer, _layerZeroEndpoint) {
        nextMintId = _startMintId;
        maxMintId = _endMintId;
    }

    /// @notice Mint your ONFT
    function mint() external payable {
        require(nextMintId <= maxMintId, "UniversalONFT721: max mint limit reached");

        uint newId = nextMintId;
        nextMintId++;

        _safeMint(msg.sender, newId);
    }
}

// File: contracts/lz-contracts/examples/ExampleUniversalONFT721.sol



pragma solidity ^0.8.0;

//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Q&Rdq6qKDWQ@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@QRXt<~'`          ._^cag@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@k*,                         `!jQ@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@U;                                 ,}Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@g;                                     'w@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@i                                         ~Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@L                  '*Ij}i~                  :@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@k                  7@@@@@@@D                  =@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@!                  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@;                  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@;                  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@t^^^^^^^^^^^^;~'`  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@QUz+:'`    k@@@@@@@@                  '@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@K?'           k@@@@@@@@                  X@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@b;              k@@@@@@@@                 f@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Q;                k@@@@@@@@               =Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Q'                 k@@@@@@@@           `;5Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@7                  k@@@@@@@@       ,~|ZQ@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@;                  k@@@@@@@@  `',;><<<<<<<<<<<?@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@;                  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@;                  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@!                  k@@@@@@@@                  `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@f                  y@@@@@@@Q                  ~@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@;                  +obDdhL`                 `Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@?                                         :Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@a'                                     `L@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@k;                                 ,YQ@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@QP>'                         `;}Q@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Rj7^,`             `';iZWQ@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Q#RdqAAKDWQ@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@


/// @title A LayerZero UniversalONFT example
/// @notice You can use this to mint ONFT and send nftIds across chain.
///  Each contract deployed to a chain should carefully set a `_startMintIndex` and a `_maxMint`
///  value to set a range of allowed mintable nftIds (so that no two chains can mint the same id!)
contract LayerZeroNFT is UniversalONFT721 {
    string public baseTokenURI;
    constructor(
        string memory _baseTokenURI,
        uint256 _minGasToStore, 
        address _layerZeroEndpoint, 
        uint _startMintId, 
        uint _endMintId
        ) UniversalONFT721("Layer Zero NFT", "LZNFT", 
        _minGasToStore, 
        _layerZeroEndpoint, 
        _startMintId, 
        _endMintId) {
            setBaseURI(_baseTokenURI);
        }

        /// @notice Set the baseTokenURI
    /// @param _baseTokenURI to set
    function setBaseURI(string memory _baseTokenURI) public onlyOwner {
        baseTokenURI = _baseTokenURI;
    }

    /// @notice Get the base URI
    function _baseURI() internal view override returns (string memory) {
        return baseTokenURI;
    }

    function tokenURI(uint256 _nftId)
        public
        view
        override(ERC721)
        returns (string memory)
    {
        require(_exists(_nftId), "Not exist");

        string memory currentBaseURI = _baseURI();
        return currentBaseURI;
    }
}

Переходим в третий раздел слева, раскрываем Advanced Configurations, зажимаем галочку Enable optimization.

После этого нажимаем Compile LayerZeroNFT.sol, ошибок быть не должно.

По желанию вы можете измень название и символ NFT коллекции. Для этого проскольте файл с кодом вниз до этой части кода. Можете вписать свои значения вместо имеющихся.

"Layer Zero NFT" - название NFT коллекции
"LZNFT" - символ NFT коллекции

Затем сново нажимаем Compile LayerZeroNFT.sol.

Переходим в четвертый раздел слева, в списке ENVIRONMENT выбираем Injected Provider -> подключаем Metamask в сети BNB.

В списке CONTRACT выбираем LayerZeroNFT.

Разворачиваем вкладку Deploy и вставляем следующие значения. Но нужно заменить QmZLaTwZU8KpkBLJMe5WwQKPv2zKv4FYUvYpcNgxW49wa2 на CID json файла, который мы загрузили ранее на Pinata.

_BASETOKENURI: ipfs://QmZLaTwZU8KpkBLJMe5WwQKPv2zKv4FYUvYpcNgxW49wa2
_MINGASTOSTORE: 35000
_LAYERZEROENDPOINT: 0x3c2269811836af69497E5F486A85D7316753cf62
_STARTMINTID: 1
_ENDMINTID: 500

Нажимаем transact, подписываем в кошельке.

В кошельке можно уменьшить плату за газ с помощью кнопки Edit.

Теперь меняем сеть в кошельке на Arbitrum Nova и еще раз деплоим смарт контракт, но используем другие параметры. _MINGASTOSTORE и _BASETOKENURI оставляем такими же, какой использовали в сети BNB, остальные значения меняем на слудующие, нажимаем на кнопку transact.

_BASETOKENURI: ipfs://QmZLaTwZU8KpkBLJMe5WwQKPv2zKv4FYUvYpcNgxW49wa2
_MINGASTOSTORE: 35000
_LAYERZEROENDPOINT: 0x4EE2F9B7cf3A68966c370F3eb2C16613d3235245
_STARTMINTID: 501
_ENDMINTID: 1000

Перед подписанием в кошельке нажимаем на Site suggested, чтобы изменить цену газа.

Ставим по маркету.

Добавляем код смарт контракта в блокчейн эксплореры BNB Chain и Arbitrum Nova

Переходим в BscScan, вставляем адрес своего кошелька, с помощью которого мы деплоили смарт контракты. Кликаем на последнюю транзакию Contract Creation.

Кликаем на адрес контракта.

Переходим во вкладку Contract, нажимаем Verify and Publish.

Указываем следующие параметры, клакаем Continue. Возможно, ваша версия компилера в Remix отличется от моей (у меня v0.8.18), вы можете посотреть версию компилера в Remix в третьей вкладке.

Вставляем код нашего контракта, можно скопировать прямо из Remix. Optimization переключаем на Yes. Больше ничего не меняем, кликаем Verify and Publish.

Если у вас появилась такая страница, занчит вы все сделали правильно. Нажимаем на адрес контракта - тот, который в квадратных скобках.

Переходим во вкладку Write Contract, коннектим кошелек.

В разделе setTrustedRemoteAddress указываем параметры:

• _remoteChainId - 175;
• _remoteAddress - адрес контракта нашей NFT коллекции в сети Arbitrum Nova, вы его можете найти по аналогии с тем, как мы находили адрес контракта в BscScan, используя сайт Nova.ArbiScan.

Кликаем Write и подписываем в кошельке.

Поднимаемся выше в раздел mint, вписываем 0 (сумма, которую мы хотим заплатить за минт 1 NFT), нажимаем Write.

Ура! Мы сминтили 1 NFT в сети BNB Chain. Теперь нам нужно проделать такие же манипуляции в сети Arbitrum Nova, но с другими параметрами.

Верифицируем смарт контракт NFT коллекции в Arbitrum Nova на Nova.ArbiScan. Делаем все абсолютно так же, как делали в BscScan. Затем нам нужно вызвать функцию setTrustedRemoteAddress в смарт контракте в сети Arbitrum Nova.

Указываем параметры:

• _remoteChainId - 102;
• _remoteAddress - адрес контракта нашей NFT коллекции в сети BNB.

Перед подписание в кошельке не щабудьте нажать на Site suggested и выбрать Market, чтобы уменьшить плату за газ. В сети Arbitrum Nova лучше так проделывать перед каждым подписанием транзакции.

Иеперь, точно так же, как и в сети BNB, минтим NFT с помощью функции mint.

Отправляем NFT из сети Arbitrum Nova в сеть BNB

Перед отправлением нашей NFT из сети Arbitrum Nova в сеть BNB нам нужно установить минимальный размер газа для транзакции. Для этого на той же странице нашего смарт контракта, где мы только что сминтили NFT, в Nova.ArbiScan в разделе Write Contract находим функцию setMinDstGas. Вписываем следующие значения.

_dstChainId: 102
_packetType: 1
_minGas: 200000

Для более глубокого понимания я распишу значение этих параметров:

• _dstChainId - ID блокчейна, 102 - это сеть BNB Chain, посмотреть можно ТУТ;
• _packetType - тип транзакции, в нашем случае 1 означает отправку;
• _minGas - минимальный размер газа для данного типа транзакции в данном блокчейне.

Нажимаем Write, чтобы исполнить функцию.

Теперь самое главное - отправляем NFT из сети Arbitrum Nova в сеть BNB. Для этого нам нужна функция sendFrom. Вписываем следующие значения:

sendFrom: 0.0006
_from: указываем свой адрес из Метамаска
_dstChainId: 102
_toAddress: свой адрес из метамаска
_tokenId: 501
_refundAddress: свой адрес из Метамаска
_zroPaymentAddress: 0x0000000000000000000000000000000000000000
_adapterParams: 0x00010000000000000000000000000000000000000000000000000000000000030d40

Что означают эти параметры:

• sendFrom - размер ETH, который мы хотим отправить во время подписания транзакции, нужно отправить достаточно средств, чтобы хватило на оплату газа в сети, куда придет NFT. При нашем текущем минимальном размере газа в 200000 средств в размере 0.0006 ETH должно хватить.
• _from - адрес, который отправляет NFT, в данном случае это мы, но если бы нам какой-то депжатель дал право отправлять какую-либо из своих NFT из этой коллекции, мы могли бы вписать адрес этого человека;
• _dstChainId - ID цепочки назначения;
• _toAddress - адрес, на который мы отправляем NFT;
• _tokenId - ID нашей NFT, которую мы хотим отправить, у нас по сути есть одна коллекция в двух блокчейнах с максимальным количество 1000, в сети BNB можно сминтить номера 1-500, в сети Arbitrum Nova можно сминтить номера 500-1000;
• _refundAddress - адрес, на который нужно отправить неиспользованные средства;
• _zroPaymentAddress - этот адрес нам нужен был бы, если бы мы платили в монетах ZRO (монеты проекта LayerZero), то есть разработчики LayerZero уже открыто вставляют параметры для будущего токена;
• _adapterParams - специальные параметры, в которыйх указана версия протокола и размер платы за газ
  0x00010000000000000000000000000000000000000000000000000000000000030d40 ->
  0001 - это версия 1
  30d40 - это 200,000 в шеснадцатеричном формате.

Нажимаем Write и подписываем в кошельке.

Мы отправили нашу NFT из сети Arbitrum Nova в сеть BNB Chain с помощью протокола LayerZero! Отслеживать статус данной транзакции в проколе LayerZero можно в LayerZero Scan. Достаточно вставить в поиск хэш транзакции, в которой мы отправляем NFT. Когда появится статус DELIVERED, это будет означать, что наша NFT добралась до пункта назначения.

На этом у меня все! Если вы справились с данным гайдом, то можно вас поздравить. Это уникальные действия, которые смогут значительно выделить ваши кошельки из общей массы в LayerZero и в Arbitrum Nova.

😊Если вам понравился гайд и вы хотите меня поддержать, можете отправить донат на мой кошелек:

0xaA039Fd15cd82E743aF7A14019a824Af00D3F691

Можете отправлять любые монеты и токены в сетях Ethereum, BNB Chain, Polygon, Arbitrum, Arbitrum Nova, Avalanche и т.д..

Также вы можете поддержать меня донатом здесь на Teletype.

Всем донатерам буду крайне признателен!

Ставьте реакции и становитесь частью команды Cryptonik 👇