Metal Roofing Warsaw MO
Common Roof Installation Problems
Roof Installation Kansas City One of the biggest problems with roof installation is often the failure to add a key structural installation step to the project. Even if you hire an experienced roofer, these are still some of the common missing pieces of roofing: Any good experienced roofer should take time to install at least a starter strip to the first few layers of slate roofing under the eaves. And while many people know that this step is important, they overlook it ends up being skipped. Here's why:
- Starter Strips are typically missing from flat roofing projects because they're always left hanging over the edge of the roofing membrane. This is a critical setup point that needs to be accounted for during flat roof installation. A starter strip is used as a connection point between the prefabricated rafters and the plywood skin. If this connection point isn't included, your home's leak problems will almost surely continue into adulthood. Here's why:
- Poor Workmanship Most people only think about workmanship when their roof is leaking. Unfortunately, poor workmanship in roofing installation often gets ignored. It's easy to understand why. Roofing workmanship involves the design, layout, and implementation of the roofing system. The details of the installation work aren't usually something people consider until the roof is leaking.
- Underlayment Installed Too Deep As mentioned above, one of the biggest issues with roofing installation is often the lack of an effective drip edge. This applies particularly to sloped roofs. In order to have a safe and efficient leak-proof barrier between the ceiling and the underlayment, you need to have a proper drip edge. However, if the underlayment is installed too deep, these edges aren't even going to touch the surface of the roofing shingles.
- Flashing and Underlayment Not Installed Enough The flashing and the underlayment are crucial components of any roofing system. The installation of these items should be completed according to the manufacturer's instructions. They aren't "do-it-yourself" projects. When they aren't installed properly, they'll either not work at all or they'll cause damage to the roof and to the rest of your home.
- Modified Bitumen Roof Installation Generally speaking, a modified bitumen is less sticky than asphalt shingle roofing. The risk of having your roof fall on you isn't greater when using these products, which makes them better suited to flat roof installation. However, the problem with this type of roofing material comes from the flexibility of its fibers. If you try to install these types of roofing systems on a pyramid-shaped roof, for instance, you run the risk of those fibers going over the edge and down the side of your home, causing severe damage.
- Attic Sealing Poor Workmanship Also an issue with some flat roofs is improper sealing of the attic. A lot of times, an attic can get wet because it's often next to a basement. If you're installing a slate roof on an attic, you must seal the attic to protect it from water damage. Otherwise, your home will be at risk of mold because it's so close to the outside.
Roof installation can take a long time for many homeowners. It's often the case that most people want to get their new roof installed quickly so they can start enjoying the benefits immediately. Unfortunately, when you purchase a home, it comes with a warranty that usually doesn't include roof installation. This often means that you'll need to do the installation yourself. Even though your warranty may cover other types of roofing repair and improvement, it doesn't cover the installation process itself.