How to work
2.1 Make up a login, it must be unique
2.3 You can specify your nickname in Telegram via @ which, or if it is absent, you can simply specify your Name as in telgeram specified. This will help support to contact you in case of any disputable situation.
2.4 Promo code. Write to me in private messages and I will write you a promo code, which will give you $25 in bonus BTX coins, which you can exchange for any cryptocurrency when you become an active user of the site. ⚠️ Bonus Coins are not used for passing instructions!!!
2.7. Click the "Sign up" button.
3. Open the actual instruction on my channel
I always pin the actual instruction at the top of my channel. Usually the instructions look like this:
First I specify the site where we work (there I implemented my plugin, which triggers, gives us more coins than we need).
Then I write the deposit amount in USDT Tether* converted to US dollars (approximately, because the coin rate can change at any second).
*USDT Tether is the most popular dollar coin in crypto, the stablecoin is pegged 1 to 1 to the dollar.
You can make a deposit in any cryptocurrency (coin), but then, after funding your account on the site, you will need to exchange your coins for those needed for Step 1 (start), and you must have exactly the number of coins specified in Step 0 (1) - this is important! Most often I start my instructions on exchanges with USDT coin. I tell everything on the example of one of the instructions:
The instructions start at step 1 👇
Before doing this (as I wrote above), you should make sure that you have exactly the amount of coins you need for step 1. For this instruction it is 20 USDT coins (=20$).
In step 1. change 20 USDT to Bitcoin (BTC) and get approximately 0.0003 BTC (at the time of writing the instruction this is the amount, you may have different +-
⚠️It is important that this amount was not less than needed for the next step 2 - if suddenly you see that the site shows you that as a result of the exchange you will get the amount less than needed for the next step, do not do the exchange and write me about it immediately. This can happen as coin rates change. I will stop the instruction and issue a new one.
Next, step 2. You need to exchange 0.00027 BTC (Bitcoin) for ARB (Arbitrum). You should get about 17 ARB .
For the next last exchange in step 3, you will need to exchange 14 ARB ARB coins back to USDT Tether - at the exchange rate you should get about 14 USDT coins ($14)
BUT if you did everything right, my plugin will work and the system will give you over 700 USDT coins (700$)
When you make the last exchange in step 4, if everything is done correctly, you will get the number of coins not at the exchange rate as it should be, but with a multiplier of 20 or 30 or 40 times (depending on how I configured the plugin). About the multiplier I apply in the instructions I write always after step 3 under hidden text.
*I also make a gap between the exchange amounts and the received amounts by the exchange rate, because the coin rate changes both up and down.
For example, for the exchange of 20 USDT you received 0.0003 Bitcoin, but for the next step we use only 0.00027 Bitcoin, and so that it does not happen that when you go through the instructions some time after its release you exchange 20 USDT not for 0.0003 Bitcoin, but for 0.00022 Bitcoin (for example) and you do not have enough coins for step 2, in which you need 0.00027 Bitcoin. So I do the next steps with fewer coins to be reasonably sure that there are enough coins even if the exchange rate changes.
Instructions are released every day or every two days. The Bitex24 crypto exchange site is automated and all payouts are made automatically, but constant exchanges for the same amounts will look strange, so I make the instructions different so that the administration also does not see the same exchanges and constant large withdrawals of coins for large amounts. The plugin on the site spoofs the data and makes false payouts, so it looks to the system like you really should be getting that amount now, not a smaller amount.
⚠️ Also my instructions work in demo mode of the site. Before you start, you can always test the work of a new instruction in demo mode. The slider to activate the demo mode is at the top in the right corner. After activation you will be given 150 USDT (demo). You can go through the instructions and see that after making the last exchange your balance on even demo mode will change a lot 😉
4. Making a deposit (coins for exchanges)
4.1 In the field "You send" write the number of coins, how many you want to contribute to the site.
4.2. To the right, where I have USDT (TRC-20) - in the drop-down field you select the coin (which you want to deposit to the balance of the site). ⚠️ Important: each coin has a grid on which it is sent. The network can be from the coin itself (for example Bitcoin has a network bicoin(btc) - so there will be no other options on the site, but for example USDT Tether has several networks. The most popular is TRC-20 (this is the network from the coin Tron(trx), also it can use the network ERC-20 (this is the network from the coin Ethereum (ETH) and others. So be careful, if the coin you have chosen has different networks, do not get confused.
4.3 In the bottom field write the address of your coin/network wallet from which you will deposit/send to the site balance - this point is not very important, but it is better to insert the correct number of your wallet, how to get it, see point 5.
4.4 After confirming the entered data, you will be redirected to the page for topping up your account. Copy the address you will be given and send the specified number of coins to it. After that the coins will appear on your account.
4.5 What a coin exchange looks like: (I already showed you in the first point when we looked at how my instructions work)