Debris Removal From Rooftops and High Rise Buildings - A Cost-Effective Alternative to Dumpsters

Removing debris from tall structures and high-rise buildings safely, efficiently and cost-effectively is pretty challenging. While metal dumpsters may be ideal for losing walk out debris on construction sites, they are way fat, cumbersome and bulky to be hoisted on rooftops or even to clear debris located several stories above ground.

Using chutes to slide debris down into a dumpster is not the ideal solution either for several reasons. First, maintaining chutes in good working order is labor intensive and requires frequent repairs because of the friction, tearing, and damage that sharp objects and abrasive materials commonly found in industrial debris can cause to the chute fabric as they slide down. In addition, dumping debris down a chute from an elevation generates a lot of airborne particles, dust and pollution that might present a substantial health hazard to workers and the overall public.

Fortunately, there are new special debris removal dumpster bags on the market which are perfectly fitted to this work and are ideal for the roofing and construction industry. These lightweight dumpster bags weigh under 10 lbs and measure roughly 36" in width, length and height respectively. They're frame-less, self-standing and unlike other flexible dumpsters and traditional metal containers available on the market, they are so light and compact, that they'll easily be deployed by anyone within 5 minutes on any rooftop, even on the tallest high rise buildings.

Despite their compact size, these reusable FIBCs (Flexible Intermediate Bulk Containers) can haul amazing quantities of debris from roof tops over and over again without falling apart. With a loading capacity of 2,200 lbs and a volume capacity of 27 cubic feet, they can hold virtually almost any abrasive or sharp material generated on a building site, including jumbo sized debris such as for example broken glass, torn metal, splintered wood, sheet-rock, cement chunks and much more. Because they are produced from woven polypropylene, these dumpster bags are rip resistant and will not burst open even if the bags are punctured while being lowered to the bottom by crane or while suspended in mid air. The straps that support these specialized FIBC bags are even tougher Polyester Strapping Manufacturer. They are made to withstand 6,000 lbs of pressure and are made from the same kind of nylon material utilized by car manufacturers for seat belts.

In addition, these special FIBC bags are built with a safe and easy to use dump bottom mechanism. This gives them a substantial edge in terms of discharge rate. Once a case is filled up with debris and lowered to walk out, its contents may be quickly emptied in to a traditional dumpster or a truck simply by releasing a few straps. This forces underneath of the bag to spread spacious and the contents to spill out while the crane lifts the bag back around the rooftop for another load.

These bags are fully customizable. Upon request the manufacturer can modify them to suit a customer's specific needs. Including altering how big bags as well as how many straps for added support. Obviously, the bags aren't just useful for removing debris from rooftops. They're also perfectly fitted to removing debris at walk out, on steep inclines or even below ground.

Producer of the specialized debris removal bags happens to be supplying a free sample bag with the purchase of three or even more bags, so if you should be starting a fresh construction, remodeling or renovation project and you need a cost-effective option to traditional metal dumpsters take full advantage of the free sample and compare how fast and efficiently you are able to clear debris from a site with your new and improved flexible dumpster bags.