November 26, 2020

Powder Coatings Market Worldwide Growth, Industry Analysis, Share, Top Players, Increase Demand, Research Report by 2027

The Global Powder Coatings Market is expected to register a CAGR of over 5%, reaching a value of around USD 19 billion by the end of 2027.

Powder coating is a free-floating, dry powder applied to a substrate. It is a dry finishing process that uses powder to create a high-quality finish. According to the Powder Coating Institute, powder coating represents around 15% of the total industrial finishing market. These coatings exhibit enhanced durability, exceptional chip and abrasion resistance, and cost-efficiency.

The demand for powder coatings is increasing as it is available in a variety of colors, is versatile, and offers several advantages over the traditional painting process.

Powder Coatings Market: Drivers & Challenges

Market Driver:

Stringent Government Regulations to Reduce VOC Emissions

Rising concerns regarding environmental degradation have resulted in the implementation of various stringent regulations such as the Clean Air Act, Clean Water Act, National Volatile Organic Compound Emission Standards, and REACH regulations. This results in high demand for powder coatings as they contain no volatile organic compounds (VOC) and toxic heavy metals such as lead or chromium.

VOCs emitted react with other harmful particulates in the air to form smog, which when exposed or inhaled can cause irritation in eyes, nose & throat, as well as heart and respiratory problems such as asthma. Prolonged exposure to severe smog conditions may cause permanent damage to lung tissue and affect the immune system.

Thus, the imposition of stringent regulations to curb VOC emissions is expected to drive the global Powder Coatings Market.

Get Sample Copy of This Report @ https://www.forencisresearch.com/powder-coatings-market-sample-pdf/

Growing End-Use Industries

Rapid industrialization and urbanization, as well as infrastructural development worldwide, is another key driver of the global Powder Coatings Market. The automotive industry is the largest consumer of powder coatings due to its durability, scratch and corrosion resistance, faster cure rates, lower cure temperatures, improved appearance, and others. Powder coatings are used in wheels, grilles, bumpers, door handles, roof racks, exterior, and interior trim. It is also used for coating oil and fuel filters, battery trays, brake pads, shock absorbers, engine block casings, etc.

The total automotive production stood at 95.6 million in 2018, with a positive percentage change in emerging economies such as India, Thailand, Russia, and Indonesia.

Apart from this, the powder coatings are used in the appliances industry for coatings panels of ranges and refrigerators, dryer drums, air-conditioner cabinets, washer tops and lids, water heaters, dishwasher racks, freezer cabinets, and among many others.

Thus, rising demand from end-use industries is driving the global Powder Coatings Market.

Market Restraint:

Fluctuating Cost of Resins Used in Powder Coatings

Resins used in powder coatings are produced from petroleum products. The supply-demand gap in crude oil results in price fluctuations of resins used in powder coatings.

Apart from this, high initial cost and high energy consumption are restraining market growth.

Powder Coatings Market: Key Segments

  • Segmentation based on resin type: Thermoset and Thermoplastic.
  • Segmentation based on coating method: Electrostatic Spray, Fluidized Bed Spray, Electrostatic Fluidized Bed, and Flame Spraying.
  • Segmentation based on end-use industries: Automotive & Transportation, Consumer Goods & Appliances, Electrical & Electronics, Architecture, Furniture, Medical, and Others.
  • Segmentation based on region covers: North America, South America, Europe, Asia-Pacific, Middle East & Africa and South America, with individual country-level analysis.

Powder Coatings Market: Report Scope

The report on the Powder Coatings Market covers a deep dive analysis of historic, recent and current market trends. Furthermore, market share/ranking analysis of key players, market dynamics, competition landscape, country-wise analysis for each region covered and the entire supply chain dynamics are covered through the below segmentation.

Request Report Methodology On Competition On Global Powder Coatings Market Here @ https://www.forencisresearch.com/powder-coatings-market-request-methodology/

List of the leading companies operating in the Powder Coatings Market include:

  • Akzo Nobel N.V. (Company Description, Company Overview, Product Synopsis, Key Developments, SWOT Analysis)
  • Asian Paints Ltd.
  • Axalta
  • Berger Paints India Limited
  • Jotun
  • PPG Industries, Inc.
  • The Sherwin-Williams Company
  • Valspar
  • SOMAR
  • Arkema
  • Evonik Industries
  • TCI Powder
  • Dupont
  • BASF SE
  • Other Key Companies

Powder Coatings Market: Report Segmentation

For the scope of the report, In-depth segmentation is offered by Forencis Research

Powder Coatings Market, by Resin Type

  • Thermoset
    • Polyester
    • Epoxy
    • Acrylic
    • Polyurethane
    • Fluoropolymer
    • Others
  • Thermoplastic
    • Nylon
    • Polyethylene
    • Polyolefin
    • Polyvinyl Chloride
    • Others

Powder Coatings Market, by Coating Method

  • Electrostatic Spray
  • Fluidized Bed Spray
  • Electrostatic Fluidized Bed
  • Flame Spraying

Powder Coatings Market, by End-Use Industries

  • Automotive & Transportation
  • Consumer Goods & Appliances
  • Electrical & Electronics
  • Architecture
  • Furniture
  • Medical
  • Others

Consult with an Analyst @ https://www.forencisresearch.com/powder-coatings-market-consult-with-an-analyst/

Powder Coatings Market by Region

  • Asia-Pacific (China, Japan, South Korea, India, Taiwan, Rest of Asia-Pacific)
  • North America (US, Canada, Mexico)
  • Europe (Germany, Russia, France, Italy, UK, Spain, The Netherlands, Rest of Europe)
  • Middle East and Africa (Saudi Arabia, UAE, Rest of Middle East & Africa)
  • South America (Brazil, Argentina, Rest of South America)

Key Questions answered by the report

  • What are the prominent developments affecting the market worldwide and its growth?
  • What will be the impact of the developments in the market on the industry and on the market players in the future?
  • What are the evolving variations of the market globally?
  • What are the evolving functions of the market globally?
  • What are the prominent aspects that will affect market growth globally during the study period?
  • Who are the key players operating in the market across the globe?
  • How are the key players leveraging in the present market scenario worldwide?

Table of Content

  1. INTRODUCTION
    1. Research Objectives
    2. Market Definition
    3. Research Scope
    4. Regional Coverage
    5. Research Timeline
    6. Assumptions
    7. Limitations
  2. RESEARCH DESIGN & SCOPE
    1. Introduction
    2. Primary Research
      1. Key Industry Expert Insight
    3. Secondary Research
      1. Vital Data from Secondary Sources
    4. Market Size Estimation
    5. Data Validation & Triangulation
  3. EXECUTIVE SUMMARY
  4. MARKET DYNAMICS
    1. Introduction
    2. Drivers
      1. Stringent Government Regulations to Reduce VOC Emissions
      2. Growing End-Use Industries
    3. Restraint
      1. Fluctuating Cost of Resins Used in Powder Coatings
    4. Opportunities
      1. Technological Advancements in Coatings Technology such Nano-TiO2 Photo Catalyst Coatings and Green Coatings
    5. Challenges
      1. Formation of Thinner Coating Layers
  5. INDUSTRY TRENDS – PORTERS FIVE FORCES ANALYSIS
    1. Introduction
      1. Power of Buyers
      2. Power of Suppliers
      3. Intensity of Competition
      4. Challenges of Substitutes
      5. Challenges of New Entrants
    2. Macro-Economic Indicators
  6. GLOBAL POWDER COATINGS MARKET BY RESIN TYPE, Market Size in USD Million and Kiloton (2019-2027)
    1. Introduction
    2. Thermoset
      1. Polyester
      2. Epoxy
      3. Acrylic
      4. Polyurethane
      5. Fluoropolymer
      6. Others
    3. Thermoplastic
      1. Nylon
      2. Polyethylene
      3. Polyolefin
      4. Polyvinyl Chloride
      5. Others
  7. GLOBAL POWDER COATINGS MARKET BY COATING METHOD, Market Size in USD Million and Kiloton (2019-2027)
    1. Introduction
    2. Electrostatic Spray
    3. Fluidized Bed Spray
    4. Electrostatic Fluidized Bed
    5. Flame Spraying
  8. GLOBAL POWDER COATINGS MARKET BY END-USE INDUSTRIES, Market Size in USD Million and Kiloton (2019-2027)
    1. Introduction
    2. Automotive & Transportation
    3. Consumer Goods & Appliances
    4. Electrical & Electronics
    5. Architecture
    6. Furniture
    7. Medical
    8. Others
  9. GLOBAL POWDER COATINGS MARKET BY REGION, Market Size in USD Million and Kiloton (2019-2027)
    1. North America
      1. US
      2. Canada
      3. Mexico
    2. Asia-Pacific
      1. China
      2. India
      3. Japan
      4. South Korea
      5. Rest of Asia-Pacific
    3. Europe
      1. Germany
      2. France
      3. Italy
      4. UK
      5. Russia
      6. Rest of Europe
    4. Middle East and Africa
      1. Saudi Arabia
      2. UAE
      3. Rest of Middle East and Africa
    5. South America
      1. Brazil
      2. Argentina
      3. Rest of South America
  10. COMPETITIVE LANDSCAPE
    1. Introduction
    2. Market Ranking/Share Analysis of Key Companies
    3. Company Benchmarking
  11. COMPANY PROFILES
    1. Akzo Nobel N.V.
      1. Company Overview
      2. Financial Overview
      3. Products/Solutions/Services Offered
      4. Key Developments
      5. SWOT Analysis
    2. Asian Paints Ltd.
    3. Axalta
    4. Berger Paints India Limited
    5. Jotun
    6. PPG Industries, Inc.
    7. The Sherwin-Williams Company
    8. Valspar
    9. SOMAR
    10. Arkema
    11. Other Key Companies
      • Evonik Industries
      • TCI Powder
      • Dupont
      • BASF SE
  1. APPENDIX
    1. Key Industry Expert Insights
    2. Primary Discussion Guide
    3. Customization Options

Purchase this Premium Industry Research Report with Analysis @ https://www.forencisresearch.com/powder-coatings-market-purchase-now/

About Forencis Research

Forencis Research is a B2B market research, intelligence and advisory firm engaging in market research and consulting services across leading industries, globally. Our robust and meticulous research team provides high growth and niche syndicated reports, customized reports and consulting reports to the diverse global fortune clientele and intellectual institutions. Forencis Research database is a constantly evolving pool of reports and white paper studies which helps companies to foster accelerated revenue growth in global and regional markets. Forencis Research delivers market research and consulting reports on high growth markets to help companies dominate their competition and set themselves apart by attaining increased revenue growth. To enable exclusive insights around the target market, Forencis Research employs robust research Methodology & Design which includes data acquisition, data synthesis and data correlation, through Primary and Secondary Research. Through the obtained data, Top-down and bottom-up methods are exercised to attain and verify data sanity within the entire market. This market data is yet again correlated with Forencis Research’s internal database before presenting it in any of our final publications. These methods of data correlation and amalgamation benefit us to put forward accurate market estimates enabling our clients to transform their business, markets and most importantly their “REVENUES”.

Contact Us

FORENCIS RESEARCH

Phone: +1 (720) 306 9020

Email: sales@forencisresearch.com

For more market research insights, please visit https://www.forencisresearch.com