The pressure gauge on the filter rises slightly

Excessive filtration pressure will damage the filter bag and the protection net, which requires attention..3MPa, which can be adjusted through the return line or the return valve on the pump.4 MPa, you should stop working and open the barrel cover and check the filter bag In the case of residue, the filter bag can be replaced and used again, and the filter bag can be reused by cleaning. The pressure of the filter is generally adjusted to be 0. It has won the love of the majority of people with its clever design. When the pressure reaches 0.

After the pump is started, the pressure gauge on the filter rises slightly, and the initial pressure is about 0. The bag filter is a simple, novel, energy-saving, emission-reducing, high-efficiency, adaptable, and other multi-purpose filter equipment. The bag filter is easy fermentation tank China to operate. It is easy to operate, convenient and fast. When using, you only need to install the filter bag of the required fineness level in the filter cartridge, check whether the sealing ring is intact, and then tighten the ring bolt of the filter cartridge cover, and then it can be put into work.

With the extension of use time, the filter residue in the cylinder gradually increases.Plate and frame filter, it is a kind of filtering equipment. It is suitable for airtight filtration of liquids with a concentration below 50% and low viscosity and less residue content to meet the requirements of purification, sterilization, clarification and other fine filtration and semi-precision filtration. Microporous membranes can be used directly without micropores. It is used differently and has a special filtering method. It is corrosion resistant, durable and durable. The pump (or explosion-proof motor can be used) and the input pipe parts of the plate and frame filter are connected by quick installation, which is easy to disassemble and clean.

Discharge through the liquid outlet and filter the residue, the purpose is to achieve solid-liquid separation. The membrane filter directly achieves the purpose of aseptic filtration. The plate and frame filter has a large filtering area, large flow rate and wide application range, so it has a wide range of uses in the pharmaceutical, chemical, food and other industries. It is used in the filtration of injection liquids in pharmaceutical factories with very good results