Good circulation and very high shearing ability indicate

Due to the strong kinetic energy brought by the high tangential speed and high-frequency mechanical effect of the high-speed rotation of the rotor, the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction, and impact in the narrow gap between the stator and the rotor. 4. High-shear emulsifier is to efficiently, quickly and evenly distribute one phase or multiple phases to another continuous phase, and under normal circumstances, each phase is insoluble with each other. The high-shear emulsifier is favored by consumers for its very stable performance and very mature technology. Push-down propeller of the high-shear emulsifier: single or multiple propellers can be installed on the drive shaft of the rotor, which enhances the circulation of materials or generates a vortex to mix lighter particles The mixing with the material can be adjusted according to the high and low liquid level.

The combined stator head of the high-shear emulsifier: the perforated stator combined with the fine mesh screen effectively provides a very large possible shearing effect. s material. The combined effect of tearing and turbulence, so that the immiscible solid phase, liquid phase, and gas phase will be uniformly and finely dispersed and emulsified instantaneously under the combined action of the corresponding mature technology and the appropriate amount of additives. They can be disassembled and cleaned. The circular opening on such head provides the most effective circulation process among all stators. The size of the stator head can change with the power of the motor, and the size of a specific type of rotor is inseparable. Of high-quality products.

At the same time, the high shear emulsifier is also one of the most widely used production equipment. Long-hole stator head of high-shear emulsifier: Long holes China Wholesale beer brewhouse factory mainly provide a very large area for surface shearing, and are mainly suitable for very fast crushing of medium-viscosity, large and small particles. A very effective circulation is achieved in fluids with relatively high viscosity. 2. The high-shear emulsifier is mainly composed of a frame and a mixing head. The strict emulsification requirements and the suspension of fine powder can be This is done very efficiently by the combined stator head.

In order to meet the needs of a variety of different processes and expand the overall scope of use, three different types of stator heads that can be replaced are specially designed. The mixing head of the emulsifier is mainly composed of a very fast-running rotor and a stator. Round-hole stator head of high-shear emulsifier: It is mainly suitable for general mixing and particle smashing. After high-frequency cyclic reciprocation, they are finally stabilized. Good circulation and very high shearing ability indicate that such a head can be used in emulsification and other medium viscosity applications. The materials are all stainless steel.