Caring for plastic windows
The owners of apartments in which plastic windows are installed are sure to face the need to clean them. The question arises, how to do it correctly? If you follow a few simple rules, you can extend the life of PVC windows, keep them in good condition. Consider what should be the care of plastic windows.
Plastic windows are highly airtight, which prevents the possibility of air and moisture entering the room. Likewise, they are not removed from the room, and as a result, condensation can form on the windows. In order to avoid this trouble, it is necessary to ventilate 2-3 times a day for 10-15 minutes. Often you need to ventilate bedrooms, kitchens.
See also plastic volume 100 ml.
Moisture settles in the coldest areas - these are double-glazed windows, therefore it is recommended not to block the flow of warm air from the battery, and also to maintain the temperature in the room at a level not lower than +15 degrees. Such solutions reduce the likelihood of fogging windows.
Double-glazed windows do not attract dust and dirt, but they still need to be washed at regular intervals. To do this, you should use a regular soap solution, if you want to use professional products, use only special ones. Abrasive detergents and cleaning are prohibited, because the surface of the window can be damaged.
Rubber seals are used on PVC windows, they guarantee the tightness of these structures. They must be cleaned every six months. To do this, you can use a soft cloth, after which it is necessary to soak the seals with silicone oil. You can be sure that such processing will significantly extend the life of the seals and windows.
Pay attention to drainage systems, through them the accumulated moisture is removed to the outside, they should also be cleaned if dirty. Cleaning of plastic windows should be regular.
Do not forget about the fittings, they also require special care. All moving parts should be lubricated with an acid and resin free oil. The oil should not damage the window covering. Such processing should be carried out every six months. With the timely processing of all elements of PVC windows, you can achieve flawless operation.
Manufacturers in the production of plastic windows expect that over time, if necessary, minor defects will be repaired, for this a polishing or grinding machine can be used. Small defects are covered with special glue.
An element such as a mosquito net does not require special maintenance. In order for it to last as long as possible, it will be better to remove it from the window during the cold season, because it is not needed during this period. It must be washed with plain water or soapy water. It is convenient to wash the mosquito net under the shower stream.
Maintenance of the plastic profile and glass unit is not particularly necessary, except for mechanical impact. It is regularly necessary to carry out maintenance of these structures with your own efforts:
- Lubricate the fittings with a resin-free product.
- Regularly inspect and clean the rubber seal and lubricate it.
- Clean the drainage or drainage holes from dirt.
- It is better to remove the mosquito net for the winter.
If we are talking about new windows, then after the completion of the installation work, it is necessary to remove the protective film from the inner and outer surfaces of the window within ten days. Over time, removing it will be problematic due to the effects of weather conditions.
Let's consider in detail how it is necessary to clean the main elements of a PVC window:
1. Clearing a profile. One of the main advantages of a PVC window profile is that it is very easy to clean. Be careful when choosing detergents / cleaning agents. Abrasives can damage the surface and make it rough. Also banned are acetone, gasoline, solvents, which can damage the integrity of the surface and, as a result, dirt will only penetrate deeper into the profile.
2. Cleaning of glasses. Also, wash the glass only with soapy water or special detergents, not abrasives for cleaning windows.
3. Cleaning of rubber seals. These elements are usually made of rubber and painted black or gray. Silicone oil or glycerin can be used for lubrication. If over time the seals have lost their elasticity or cracked, they must be replaced with new ones in order to restore all the functionality of the plastic window.
When cleaning windows and profiles, do not use sharp objects, be careful.