Aquatic aerator is about the impeller aerator is currently widely used pond fish farming machinery

Check the junction box, if it is eroded by water, replace it, and make the junction box waterproof. At the same time, it is strictly forbidden to contact the motor with water to avoid burning the motor due to flooding. When checking, rotate the rotor of the motor by hand, and listen to whether there is friction or collision in the machine. When the winding or attachment on the impeller is found, it should be removed in time. 6. It is found that the China Deep Water Jet Aerators buoyancy of the floating body is reduced due to wear and tear, and it should be checked and repaired to avoid the increase of the load and the burning of the motor.

The protective cover should be installed correctly to prevent the electrical circuit from getting wet. Check whether the impeller is deformed, if it is deformed, repair the original, and then apply anti-rust paint. The aerator is subject to a large torsion during work and must be installed firmly. After the aerator has been used for a period of time, its motor, gearbox, impeller, floats and lines are easily damaged and malfunction, and must be inspected and maintained: the motor.

Aquatic aerator is about the impeller aerator is currently widely used pond fish farming machinery, it is through impeller stirring and other methods to aerate and aerate the water body, improve water quality and promote fish growth and increase fish production. In order to ensure safe operation and improve the quality of operation, the following points should be noted: 1. If the oil in the tank has deteriorated, replace the deteriorated oil, clean the mud and sand in the tank, and inject new oil. When it rains in the evening, or when there is a southerly wind and high temperature during the day, when there is a sudden northerly wind at night, or when a large amount of feeding causes the water quality to be too fertile, you should Pay attention to start the machine as soon as possible to prevent floating ponds caused by fish floating heads.

The principle is: open at noon on a sunny day, open in the morning on a cloudy day, open in the middle of the night in continuous rain, and do not open in the evening. The aquatic aerator should be flexibly controlled according to weather changes, fish dynamics and aerator load. If damage is found, it should be repaired and replaced. Use a megohmmeter to check the insulation of the motor, check whether the terminal is safe and stable, and whether the wire is damaged or exposed.

If it is corroded and leaking, repair it by welding. During operation, pay attention that people and animals should not approach the impeller of the aerator to avoid damage from the impeller. Check whether the bearing is damaged, whether the carbon brush is worn, and polish the rust on the commutator surface.