Fix Canon Printer Error B200 on all printer models

Canon Printer Error Code B200 is a service error connected to the print head of the system. This can mean that the print head output or temperature is not normal. The official indicates that the Canon is going to follow the move. Now, turn off the printer and separate the power cord from the electrical socket. Now, open the covers of the printer and, if accessible, remove any protective tape.

Check to see if there are any unwanted items like broken bits of paper, hair, buttons, cotton, etc. inside the printer. Now eject the printer cartridge and clean it. Put them back in order kindly, and if this doesn't correct the problem, get in contact with the support staff for appropriate help.

Reason That Makes Canon Printer Error Code B200

1. Canon Printer Error B200 typically arises due to problematic cartridges, and one of the easiest ways to address this problem is to uninstall a defective cartridge.
2. B200 will also occur due to printhead complications, and one thing you can do is delete the printhead and clean it.
3. Please consult our How to Correct Print Errors tab for any other printer errors.
4. If you have an issue with some peripherals, not just a printer, check out our Peripherals Solutions page.

How Canon Printer Error Code B200 Occurs:-

As per Canon, the appearance of Canon Printer Error Code B200 is a warning of a flawed print head. Since the print head is one of the most critical aspects of a printer, any issues dealing with it will most likely be the end of a printer.

Method 1: Reset Print Head.

1. Unplug the Canon printer.
2. Remove the cover so that you can see the print head.
3. Flip the print head to the middle.
4. Re-plug your print head, turn it on whilst the cover is still open.
5. Now, the print head is beginning to shift.
6. When the print head continues heading to the very left, remove the cover.
7. Enable the printer to reboot.

Method 2: Eliminating Obstacles.

1. Open the cover of the printer and empty the ink tanks.
2. Pull up the lock lever on the hand of the keeper of the ink tank.
3. Now, take the print head out of the cart device.
4. Place the print head back on it and lock the lever.
5. Place the ink tanks back in place and shut the cover of the printer.
6. Turn off and unplug your machine.
7. After 5-10 minutes, restart the printer.

Method 3: Cleaning Print Head

1. Unplug the printer and remove the cartridges.
2. Remove the print head and disinfect it with pure alcohol. Shake up sometimes.
3. Using alcohol, clean the connexions that attach the print head to the printer.
4. After drying the print head for an hour, it is reconnected to the printer along with the cartridges.
5. Drag the print head to the left.
6. Please re-plug your printer.
7. Place the cover of the printer down and turn the printer on.

Method 4: Excluding Old Ink

1. Turn off the printer and empty the cartridges.
2. Place the print head under hot water until the water is absolutely clear.
3. Dry the print head with a towel and quit for one hour.
4. Reinsert the print head in the printer.
5. Restart your printer. Here's a reference for solving a paper jam.

Method 5: Stopping Paper Jam

1. Switch the printer off.
2. Unplug the printer for around 10 minutes.
3. Now, pull some of the paper out of the printer.
4. Carefully, search to see if there is any jam or obstacle in the direction of the article.
5. If nothing is detected, re-plug and restart the printer.

If neither of the above remedies works for you, go and get the Canon tech CD that came with your printer and reinstall the printer engine. Now restart your printer to figure out whether or not the Canon Printer Error Code B200 is still shown.

And after the driver has been reinstalled, if your canon printer ever displays Error B200, it's definitely a real error and you should start searching for a substitute for your printer.

Thanks For Reading...!