Easy Guide To Make Activated Carbon At Home

When the air smells bad, and the water tastes awkward, you know something is wrong with them, and most probably they are polluted.

While many people have traded the safety and cleansing power of activated charcoal for all kinds of poisonous air sprays and dangerous municipal water supplies, activated carbon can save your life now as well as in the future.

You can make activated carbon coalactivatedcarbon.com home if you have proper tools and materials. This substance has a lot of uses, and air and water filtration are on top of them as it offers the widest range of protection against a range of chemicals.

Read the following article and learn how to deal with it!

How to Make Activated Carbon powdered activated carbon sale
Even though activated carbon is not especially difficult to make, you will still need the right tools and materials. Here are the basic steps:

Step 1 – You will need wood or some other dense plant fiber to burn. Hardwood, coconuts, or just about anything else that is porous and will burn well can be used for this purpose. Make sure the material is as dry as possible before burning it.

Step 2 – Put the material in a pot and cover it. The pot should have some ventilation holes in it, however, the flow of oxygen should remain limited. If you know how to make tinder cloth, then you can use a similar process for making charcoal.

Step 3 – If you have a campfire going, set the pot on the fire. The temperature will have to be hot enough to cause the material within the pot to burn. Your goal is to burn off everything but the carbon. It may take several hours for this process to complete. During that time, you should see smoke and gas escaping from the pot.

Step 4 – Let the charcoal cool, and then rinse it to remove any ash or other debris.

Step 5 – Grind the charcoal into a powder. As you get better at making activated carbon, you can try leaving it in small chunks. Remember that later on, the charcoal will need to be saturated with a chemical that will increase pore size.

If the chunks are too large, you may not achieve this goal, and the resulting activated carbon will not be as efficient or as effective. Make sure the charcoal from Step 5 (this step) is completely dry before mixing it with anything else.

Step 6 – Next, you will either need bleach, calcium chloride, or lemon juice to turn the charcoal into activated carbon. Of the three materials, calcium chloride can be made from natural resources as long as you observe some basic safety precautions.