HWID Spoofer Loader — Installation Guide / Инструкция по установке
Loader - https://titanx.gg/api/download/loader?ref=f46u6fpsa9grhpmu
Первый запуск и базовые шаги для работы Spoofer
1. Запустите лоадер и введите ключ.
Start the loader and enter the key.
2. Если нужно начать с чистого состояния:
If you need to start with a clean state:
a)Перезагрузите роутер для получения нового IP (необходим динамический IP).
Reboot the router to get a new IP (a dynamic IP is required).
b)Нажмите Clean в лоадере для очистки предыдущей сессии.
Press Clean in the loader to clear the previous session.
c)Нажмите Reload PC и дождитесь перезагрузки системы.
Click Reload PC and wait for the system to restart.
3. Если какая-то функция не была отключена вручную — нажмите Security Off → Reload PC.
If any function has not been disabled manually, click Security Off → Reload PC.
4. Запустите HWID Identity Changer и ожидайте полной загрузки драйвера.
Run HWID Identity Changer and wait for the driver to fully load.
5. Закройте приложение. Готово.
Close the application. Done.
Вариант B — Со сторонним ПО
Option B — With third-party software
1. Windows Defender Real-time Protection
Windows Defender Выключить Защиту в режиме реального времени
2. Windows Firewall off
Брандмауэр Windows выключить
3. SmartScreen off
SmartScreen выключить
4. Memory Integrity (Core Isolation) off
5. Vulnerable Driver Blocklist
Errors and their correction
Ошибки и их исправление
1. Make sure you don't have FaceitAC or Vanguard installed.
Убедитесь, что у вас не установлены FaceitAC или Vanguard.
2. If you have this error - Cannot load library
Download this-https://aka.ms/vc14/vc_redist.x64.exe
1. Troubleshooting: Launcher won't start (DLL errors)
If you see an error like: vcruntime140.dll is missing msvcp140.dll is missing vcruntime140_1.dll is missing This means your system is missing Microsoft Visual C++ Redistributable — a standard Windows component required by TitanX Launcher. Fix: Download Visual C++ Redistributable 2015–2022 (x64) from the official Microsoft page: https://aka.ms/vs/17/release/vc_redist.x64.exe Run the installer, click Install, wait for it to finish Restart your PC Launch TitanX again — it should work now If you're on a 32-bit system (rare), also install the x86 version: https://aka.ms/vs/17/release/vc_redist.x86.exe If the issue persists after installing — open a ticket in support.
Если вы видите следующую ошибку: «Отсутствует файл vcruntime140.dll», «Отсутствует файл msvcp140.dll», «Отсутствует файл vcruntime140_1.dll», это означает, что в вашей системе отсутствует пакет Microsoft Visual C++ Redistributable — стандартный компонент Windows, необходимый для работы TitanX Launcher. Решение: Загрузите Visual C++ Redistributable 2015–2022 (x64) с официального сайта Microsoft: https://aka.ms/vs/17/release/vc_redist.x64.exe Запустите установщик, нажмите «Установить» и дождитесь завершения процесса. Перезагрузите компьютер. Запустите TitanX снова — теперь он должен работать. Если у вас 32-разрядная система (редко встречается), установите также версию x86: https://aka.ms/vs/17/release/vc_redist.x86.exe Если проблема не устранилась после установки — откройте заявку в службе поддержки.
2. Network adapter disabled after spoof
Network adapter disabled after spoofing In rare cases, the network adapter may not re-enable correctly after MAC spoofing. How to fix: Option 1 — Device Manager: Press Win+X → Device Manager Expand Network adapters Right-click your adapter → Enable device Option 2 — PowerShell (Admin):
Enable-NetAdapter -Name "Ethernet" -Confirm:$false(Replace "Ethernet" with your adapter name) Option 3 — Full reset: Device Manager → right-click adapter → Uninstall device Click Scan for hardware changes (or reboot)
This issue is rare and usually happens if another program interfered during the spoofing process.
Сетевой адаптер отключен после подделки
Сетевой адаптер отключен после подмены MAC-адреса В редких случаях сетевой адаптер может не включиться должным образом после подмены MAC-адреса. Как исправить: Вариант 1 — Диспетчер устройств: Нажмите Win+X → Диспетчер устройств Разверните раздел «Сетевые адаптеры» Щелкните правой кнопкой мыши по вашему адаптеру → Включить устройство Вариант 2 — PowerShell (с правами администратора):
Enable-NetAdapter -Name «Ethernet» -Confirm:$false
(Замените «Ethernet» на название вашего адаптера) Вариант 3 — Полный сброс: Диспетчер устройств → щелкните правой кнопкой мыши по адаптеру → Удалить устройство Нажмите «Проверить наличие изменений оборудования» (или перезагрузите компьютер)
Эта проблема возникает редко и обычно происходит, если во время процесса подмены MAC-адреса вмешалась другая программа.
3. Launcher must be run as Administrator
Run as Administrator TitanX requires Administrator privileges to work How to fix: Right-click the spf.exe Select Run as administrator To make it permanent: Right-click the spf.exe → Properties Go to Compatibility tab Check Run this program as an administrator Click Apply → OK
Программу запуска необходимо запустить от имени администратора
Запустить от имени администратора
Для работы TitanX требуются права администратора
Щелкните правой кнопкой мыши файл spf.exe
Выберите «Запуск от имени администратора»
Щелкните правой кнопкой мыши файл spf.exe → «Свойства»
Перейдите на вкладку «Совместимость»
Установите флажок «Запускать эту программу от имени администратора»
Нажмите «Применить» → «ОК»
4.Driver failed to load (anti-cheat running)
Close anti-cheat software before running TitanX Running anti-cheat software (EAC, BattlEye, Vanguard, FACEIT) blocks kernel driver loading. The launcher does not detect or close anti-cheats. How to fix: Option A: Close all games completely Check your System Tray (bottom right) for anti-cheat icons Open Task Manager (Ctrl+Shift+Esc) and look for: • EasyAntiCheat / EasyAntiCheat_EOS • BEService / BattlEye • vgc / vgtray (Vanguard) • FACEIT / faceitclient End those processes Run TitanX before launching any game Option B: Remove Vanguard and Faceit anti-cheat from your PC Reload the PC Run TitanX before launching any game
Riot Vanguard starts at boot. To stop it: System Tray → right-click Vanguard icon → Exit Vanguard. You'll need to reboot to play Valorant later.
Не удалось загрузить драйвер (запущена система защиты от читерства)
Закройте античит-программы перед запуском TitanX
Работающих античит-программ (EAC, BattlEye, Vanguard, FACEIT) блокирует загрузку драйверов ядра. Программа-запускник не обнаруживает и не закрывает античит-программы.
Проверьте системный трей (в правом нижнем углу) на наличие значков анти-читов
Откройте Диспетчер задач (Ctrl+Shift+Esc) и найдите:
• EasyAntiCheat / EasyAntiCheat_EOS
Запустите TitanX перед запуском любой игры
Удалите античит-программы Vanguard и Faceit с вашего ПК
Запустите TitanX перед запуском любой игры
⚠️ Riot Vanguard запускается при загрузке системы. Чтобы остановить его: панель задач → щелкните правой кнопкой мыши значок Vanguard → «Выйти из Vanguard». Вам понадобится перезагрузить компьютер, чтобы позже играть в Valorant.
5. Vulnerable Driver Blocklist
Vulnerable Driver Blocklist Windows blocks certain known vulnerable drivers from loading. TitanX launcher automatically disables this blocklist for you. What happens: The launcher writes two registry keys to disable the blocklist: CI\Config\VulnerableDriverBlocklistEnable → 0 CI\Protected\VerifiedAndReputableBlockEnabled → 0 (Win11 24H2+) What you need to do: Just reboot your PC when the launcher tells you to, then run TitanX again. That's it — the fix is automatic.
If for some reason the auto-fix doesn't work, you can do it manually:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\CI\Config" /v VulnerableDriverBlocklistEnable /t REG_DWORD /d 0 /f reg add "HKLM\SYSTEM\CurrentControlSet\Control\CI\Protected" /v VerifiedAndReputableBlockEnabled /t REG_DWORD /d 0 /f
Список заблокированных уязвимых драйверов
Windows блокирует загрузку некоторых известных уязвимых драйверов. Программа запуска TitanX автоматически отключает этот список для вас.
Программа запуска записывает два ключа реестра, чтобы отключить список блокировки:
CI\Config\VulnerableDriverBlocklistEnable → 0
CI\Protected\VerifiedAndReputableBlockEnabled → 0 (Win11 24H2+)
Просто перезагрузите компьютер, когда лаунчер попросит вас об этом, а затем запустите TitanX снова. Вот и все — исправление происходит автоматически.
ℹ️ Если по какой-то причине автоматическое исправление не сработало, вы можете сделать это вручную:
Откройте командную строку от имени администратора:
reg add «HKLM\SYSTEM\CurrentControlSet\Control\CI\Config» /v VulnerableDriverBlocklistEnable /t REG_DWORD /d 0 /f
reg add «HKLM\SYSTEM\CurrentControlSet\Control\CI\Protected» /v VerifiedAndReputableBlockEnabled /t REG_DWORD /d 0 /f
6. Memory Integrity (HVCI) is enabled
Disable Memory Integrity (Core Isolation) Memory Integrity (HVCI) prevents unsigned drivers to load. This must be turned off for TitanX to work. How to fix: Open Windows Security (search in Start menu) Go to Device Security Click Core isolation details Turn Memory integrity to Off Restart your PC (required!) If the toggle is greyed out: Open Command Prompt as Administrator and run:
reg add "HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity" /v Enabled /t REG_DWORD /d 0 /fOn Windows 11, Memory Integrity might be enabled by default. You must disable it manually or press the button Security Off.
Отключение функции «Целостность памяти» (изоляция ядра)
Функция «Целостность памяти» (HVCI) предотвращает загрузку неподписанных драйверов. Для работы TitanX эту функцию необходимо отключить.
Откройте «Безопасность Windows» (введите в поиске в меню «Пуск»)
Перейдите в раздел «Безопасность устройств»
Нажмите «Сведения об изоляции ядра»
Установите для параметра «Целостность памяти» значение «Выкл.»
Перезагрузите компьютер (обязательно!)
Если переключатель неактивен (затенен):
Откройте «Командную строку» от имени администратора и выполните:
reg add «HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity» /v Enabled /t REG_DWORD /d 0 /f
Затем перезагрузите компьютер.
ℹ️ В Windows 11 функция «Целостность памяти» может быть включена по умолчанию. Необходимо отключить ее вручную или нажать кнопку «Безопасность» и выбрать «Выключить».
7.Secure Boot is enabled
Disable Secure Boot Secure Boot blocks unsigned kernel drivers from loading. TitanX requires Secure Boot to be disabled in your BIOS. How to fix: Restart your PC and enter BIOS (press DEL or F2 during startup — depends on your motherboard) Navigate to Security → Secure Boot Set Secure Boot to Disabled Save & Exit (F10)
If the option is greyed out, first set OS Type to "Other OS" or disable Secure Boot Keys, then try again.
Common BIOS paths by brand: • ASUS: Boot → Secure Boot → OS Type → Other OS • MSI: Settings → Security → Secure Boot → Disabled • Gigabyte: Boot → Secure Boot → Disabled • ASRock: Security → Secure Boot → Disabled
Отключение безопасной загрузки
Функция безопасной загрузки блокирует загрузку неподписанных драйверов ядра. Для работы TitanX необходимо отключить безопасную загрузку в BIOS.
Перезагрузите компьютер и войдите в BIOS (нажмите DEL или F2 во время запуска — в зависимости от материнской платы)
Перейдите в раздел «Security» → «Secure Boot»
Установите для параметра «Secure Boot» значение «Disabled»
Сохраните настройки и выйдите (F10)
⚠️ Если опция неактивна (затенена), сначала установите OS Type в «Other OS» или отключите Secure Boot Keys, затем попробуйте снова.
ℹ️ Типичные пути в BIOS по брендам:
• ASUS: Boot → Secure Boot → OS Type → Other OS
• MSI: Settings → Security → Secure Boot → Disabled
• Gigabyte: Boot → Secure Boot → Disabled
• ASRock: Security → Secure Boot → Disabled
8. WDFilter is currently running
Disabled windows defender We recommend to disable windows defender using dcontrol by Sordum
- Go to Windows security
- Go into Virus & threat protection
- Go into Manage settings under Virus & threat protection Settings
- Disable Real-time protection and tamper Protection
- Download dcontrol from https://www.sordum.org/9480/defender-control-v2-1/
- Run dcontrol and press disable
Мы рекомендуем отключить Windows Defender с помощью программы dcontrol от Sordum
Перейдите в раздел «Безопасность Windows»
Перейдите в раздел «Защита от вирусов и угроз»
В разделе «Настройки защиты от вирусов и угроз» перейдите в «Управление настройками»
Отключите «Защиту в режиме реального времени» и «Защиту от несанкционированного вмешательства»
Скачайте программу dcontrol по адресу https://www.sordum.org/9480/defender-control-v2-1/