How to use car paint thickness tester?

LS220B car paint thickness tester is professionally used for thickness measurement of used car paint film. The car paint thickness tester transmits the measurement data to the mobile phone APP in time through its own Bluetooth function. The mobile phone APP can record the paint thickness values of different parts of the car and the corresponding shell materials, and can generate test reports. The test report can be stored as a picture format and can be shared via QQ and WeChat.

1. The position where the fingers hold the non-slip groove on the lower part of the instrument.

2. Press the probe of the instrument vertically on the surface of the measured object to keep the probe stable. Do not tilt or shake it. The measurement result will appear on the screen and a buzzer will prompt.

3. To continue the measurement, you can raise the probe, away from the object to be measured, and then follow step 2) again.

4. During measurement, the following interfaces may appear:

1) + INFI Non-metallic substrate: In automatic mode, the measurement exceeds the effective measurement range or the measured object is a non-metallic substrate.

2) + INFI non-metallic substrate: In the manual non-ferrous measurement mode (NFe measurement mode), the measurement exceeds the effective measurement range or the measured object is a non-metallic substrate.

3) + INFI non-ferrous substrate: In the manual iron-based measurement mode (Fe measurement mode), the measurement exceeds the effective measurement range or the measured object is a non-ferrous substrate.

4) -INFI recommended zero adjustment: it is recommended to re-zero.

5) In automatic identification mode, when switching from Fe matrix to NFe matrix, it will prompt: NFe aluminum matrix.

6) In automatic recognition mode, when switching from NFe matrix to Fe matrix, it will prompt: Fe iron matrix.