July 29, 2020

Note for UV disinfection lamp

Note for UV disinfection lamp:
1. When using ultraviolet disinfection lamps, people, animals and plants must leave the scene.
2. don't stare at the ultraviolet disinfection lamp for an extended time. Ultraviolet rays can damage human skin and mucous membranes to a particular extent. When using ultraviolet disinfection lamps, concentrate to protection. The eyes must not look directly at the ultraviolet source, otherwise the eyes are going to be hurt.
3. When disinfecting items with ultraviolet disinfection lamps, spread or hang the things to expand the irradiation surface. The effective distance is one meter, and therefore the irradiation is about half-hour .
4. When using ultraviolet disinfection lamps, the environment should be kept clean. There should be no dust and water mist within the air. When the indoor temperature is less than 20 degrees Celsius or the ratio exceeds 50%, the irradiation time should be extended. After scrubbing the ground , wait until the ground is dry before disinfecting with ultraviolet .
5. After using the ultraviolet disinfection lamp, remember to ventilate for half-hour before entering the space .
6. Before using the ultraviolet , make certain to see and make sure that the intensity of the ultraviolet are able to do the sterilization effect. The intensity of ultraviolet is that the main think about the sterilization effect of ultraviolet . The radiation intensity of the ultraviolet source will gradually decrease during the utilization process. so as to make sure the disinfection effect of the ultraviolet source and more effectively prevent the occurrence of nosocomial infections, it's very necessary to regularly check the intensity of the ultraviolet source . The wavelength of the ultraviolet germicidal lamp is usually 253.7nm, and therefore the UVC uv light intensity meter is required to detect the ultraviolet intensity of the germicidal lamp.
Linshang LS126C uv light intensity meter is an ultraviolet irradiance meter dedicated to energy detection of ultraviolet germicidal lamps. The spectral response range is 230nm-280nm, and therefore the peak wavelength is 254nm. The instrument is provided with a 1-meter hook, which may be hung vertically under the lamp tube very conveniently. The instrument comes with a Bluetooth function, which may be linked to a mobile dedicated APP to understand wireless monitoring data from a particular distance. Avoid being burned by ultraviolet rays when viewing data on site, and truly save data automatically for unattended measurement. Brings convenience to your UV energy monitoring.