What are the steps to do the Victure Smart Home Camera Setup?
You no longer have to be worried about the security of your house. Victure camera provides you the best features to make your house safe and secure. You can easily do the Victure Smart Home Camera Setup and installation easily with some simple steps only. Here, you will know more about the setup and reset your device and troubleshooting the issues with your device.
Guided information to do the Victure Smart Home Camera Setup
If you are looking for simple steps for setting up victure camera, this is the place for you. You can now easily setup your camera with the information provided below.
1. First of all, you have to connect your camera to the power source and then red indicator will light up automatically.
2. Now, you have to plug one side of the cable into the camera and the other side to the router.
3. You have to be sure that you are using your phone and camera on the same router network.
4. Then, you have to go to the Eye cloud and click on the “+” sign and add the camera.
5. For adding manually, you have to input the camera UID or scan the QR code.
6. Then, enter the default password. You need to change the password for security reasons.
7. Next, you have to tap on the Search in LAN and you will see the cameras available.
8. Now, you will see Add Camera interface after some time.
9. With that, you are done with the setup process.
Steps to connect your Victure Camera with wireless method
You can now connect your Victure Camera With the wireless method using the steps below.
1. To connect to your Victure camera, you need to download the eye cloud application on your smartphone.
2. Now, you have to go to the EyeCloud and then to the register page.
3. Then, you have to enter the username and password and finish the account registration.
4. Now, tap on “Me” and then to “Account & Security” to “Bind email” and bind and email address.
5. Now, for adding a device, you have to connect your camera to the power source.
6. Then, open the EyeCloud app and then tap on add sign and you have to add the camera.
7. Now, you have to follow the instructions on the screen to finish it up.
8. You are now connected to your Victure Camera.
How to update the Victure camera firmware?
If you are facing some performance issues, that might be because you are using an old version of firmware. You can easily update the firmware of your device with the instructions provided below.
· To update the firmware, you have to launch the EyeCloud app on your mobile.
· Then, go to the login page and log in to it using the login credentials.
· Once you are done with the login process, you have to check if there is any update available to download.
· Then, you have to download the update and your devcie will reboot automatically.
· With that, you are done with your firmware update process.
Easy Steps for the Victure Camera Reset
If you are not able to fix the issues with your Victure camera using the troubleshooting steps provided with the setup guide, you can reset your camera. For that, the simple steps provided below.
· For the reset process, you have to find the reset button at the bottom of your camera.
· Then, use a small pin to press it and then hold it for few seconds and then release it.
· With that, your device will restart after few seconds.
· Now, you are all done with the reset process and your device se set to the factory default version.
· You have to configure your device again for better performance and access.
Troubleshooting the Victure Smart Home Camera Setup issues
If you are having trouble with your device, while trying to do the Victure Smart Home Camera Setup and login, you can fix that with the troubleshooting steps provided below:
· First of all, you need to check if there are no connection issues. You can disconnect your camera and then connect it again.
· You need to check if your antennas are fixed properly.
· Then, you have to check if you are entering the correct password.
· Also, you have to make sure that the SSID name in the Wi-Fi settings is correct.
· Make sure, there should not be any signal interference.
· You can also try to change the frequency band of your router.
· You can do is update your firmware that might fix the issue.
· If nothing works for you, you can reset your device.
Conclusion
The above information will be great help while setting up victure camera. You can now easily setup and install your camera without any trouble. In case, you face any trouble with your device, you can use the troubleshooting steps to fix that. Otherwise, reset your camera to the factory default version. To get more detailed information regarding your camera, you can contact our support team by calling us on our toll-free number. Will guide you properly.