Your smaller planter should now fit snuggly into the mold you just made. I was really worried about having the resin leak down the sides or down the inside, so I taped around the top of the concrete so make sure the mood was snug, and then…I also clamped around the edges to doubly make sure that it was all tight! The last step is to put the inside of the mold back inside of the small planter. Make sure to push it down so that it is tight again. Now it’s time to mix your resin. Mix the EasyCasrt according to the directions on the package, making sure to mix it in one cup, and then transfer it to a second cup and mix again. I made 8oz (4 oz of part A and B), but I only needed about 4 oz total.
Once the resin was mixed, I added 10 drops of the transparent dye (so if you mix 4 oz, you may only need half as many drops). epoxy resin manufacturers Pour the resin mixture into the gaps of your mold until you reach the desired height. It is a self-leveling product, so it will level itself out. Pour until you are happy with the height. Let the resin cure overnight as per the instructions on the package.When the piece comes out, you can sand down the top of the planter so that it looks shiny and beautiful. The best way to do this, is by wetting some wet sandpaper.
Hey Resin Crafters! Lindsay from Artsy-Fartsy Mama here with a beach-inspired resin project. The beach is one of my favorite places to visit. I love the feel of the sand on my toes, the beautiful blue color of the ocean, and the calming sound of the waves. We recently took a trip to Turks and Caicos and brought home some sand that I decided to use to make coasters as a beautiful reminder of our trip! To make one coaster, you will need about 3 oz of resin. Wear gloves to protect your hands, and pour equal amounts of resin and hardener into a mixing cup. Use a stirring stick and mix the resin well for 2 minutes. Pour the resin into a clean mixing cup and stir for another minute.