Plating thickness meter manufacturer in China

The LS220 plating thickness meter produced by Linshang, a plating thickness meter manufacturer, is professionally used to detect the thickness of second-hand car paint films. When detecting the thickness of the paint film of a used car, the instrument is turned on and the probe is pressed vertically on the surface of the car to obtain the thickness of the paint film. The test can be repeated at the same location, and the average value is the thickness of the paint film. If the detected car paint thickness is higher than 400μm, it can be determined that the car has been scratched or a serious car accident, and it is still repaired. This car should be purchased carefully. Because it is likely that there are problems with the internal parts of the car, this car is likely to have an accident during driving. Whether it is for the quality of the car or for our personal personal safety, when buying a second-hand car, it is recommended to use the coating thickness gauge of the coating thickness gauge manufacturer Lin Shang Technology to detect whether the vehicle has experienced a car accident.

Plating thickness meter manufacturer Linshang instruments measure the thickness of car paint

LS220 product parameters of Linshang, a plating thickness meter manufacturer:

Measuring principle: Fe: Hall effect / NFe: eddy current effect

Probe type: built-in integrated

Measuring range: 0.0-2000μm

Resolution: 0.1μm: (0μm-99.9μm)

1μm: (100μm-999μm)

0.01mm: (1.00mm-2.00mm)

Unit: μm / mil

Measurement accuracy: ≤ ± (3% reading + 2μm)

Measurement interval: 0.5S

Minimum measurement area: Ø = 25mm

Minimum radius of curvature: convex: 5mm / concave: 25mm

Minimum substrate thickness: Fe: 0.2mm / NFe: 0.05mm