China Spray Embroideries
@sprayembroideries
China Best Commercial Embroidery Machines Manufacturers,For Sale
5 posts

The wear will be accelerated due to debris

If the various shaft parts of the installation are not clean, the shaft sleeve will heat up too high and the transmission torque will be too heavy. If the device does not meet the required technical requirements, the computer car cannot malfunction.

Change the parameters of the computerized embroidery machine

The length of the short upper thread of the upper thread for trimming is closely related to the tension of the thread take-up spring and the adjustment of the thread path. Short cut bottom line Introspect the depth of the knife, the shallower the knife depth, the shorter the bottom line; Introspect whether the thread buckle fork can be buckled too tightly. Loss. The first thing to pay attention to is that the choice of needles for computerized embroidery machines. If the machine surface is not tightly closed, if the buckle wire has insufficient capacity and the buckle wire is not tight, it will also cause the thread to be cut.

The goals of the motor are far greater than the needs of the embroidery frame it drives

The computerized embroidery machine is a computer system that drives the movement of the embroidery machinery by controlling the peripheral execution organizations (such as motors, electromagnets, Spray Printing Embroidery Machines etc. Therefore, the matching relationship between mechanical and electrical directly affects the performance and functional goals of the computerized embroidery machine. Color-changing motor and color-changing organization of computerized embroidery machine The type and parameters of the color-changing motor should match the type and load of the color-changing organization (the centralized hooking of the motor also belongs to this field).).

Improve the method of pleating filter media of crimping machine and crimping machine

The adjustment of the mechanical creasing machine, Strict requirements and possibilities of crimping machine. The newly emerging filter media on the market have the characteristics of larger application range and higher filtration and separation efficiency, which stimulated a substantial increase in the demand for pleated filter media products.

The texture of the things made is better than other ones

It is rare to repair it once, if you want to change it, you can replace it with a better one, saving you trouble. But I personally think that the effect of M3 is better. To These cams are roughly the same, the only difference is that their trajectories are different. The texture of the things made is better than other ones.